SAT-DIC: Academic Profile

📊 Research Metrics

56

WoS/ISI Papers

64

Scopus Papers

0

TCI Papers

41

Proceedings

970

Scopus Citations

17

H-Index

📝 Patents

3

Patents Granted

ของเล่นเด็กชนิดบีบจากยางธรรมชาติ
อนุสิทธิบัตร, 2565-1
สูตรและกรรมวิธีการเตรียมพอลิเมอร์ผสมสำหรับวัสดุฉนวนไฟฟ้า
อนุสิทธิบัตร, 2561-2567
กรรมวิธีการผลิตแผ่นหนังเทียมจากยางธรรมชาติผสมผงหนังและแผ่นหนังเทียมที่ได้จากกรรมวิธีนี้
อนุสิทธิบัตร, 2557-2563

📚 Books

3

Books Published

พอลิเมอร์เชิงประกอบ : ทฤษฎีและการประยุกต์ใช้งาน (2562)
วัสดุเชิงประกอบ: ความรู้พื้นฐานและสมบัติ (2552)
วิจัยยางพาราเพื่ออนาคตที่ยั่งยืน โครงการวิจัยยางพาราแห่งชาติ (2549)

🔬 Research Projects

29

Projects

📖

📘

PAGE-1

การเตรียมวัสดุเชิงประกอบนาโนจากยางธรรมชาติอิพอกไซด์และเส้นใยนาโนเซลลูโลส
Preparation of nanocomposites based on epoxidized natural rubber and cellulose nanofiber
บทบาท: หัวหน้าโครงการ, 2567

การพัฒนาวัสดุเซนเซอร์ยืดหยุ่นจากคอมโพสิทนาโนระหว่างยางธรรมชาติอิพอกไซด์และเส้นใยนาโนเซลลูโลส
Development of flexible sensor materials from nanocomposites based on epoxidized natural rubber and cellulose nanofiber
บทบาท: หัวหน้าโครงการ, 2566

นวัตกรรมอุปกรณ์บริหารกล้ามเนื้อมือจากยางธรรมชาติสำหรับผู้สูงอายุ
Innovative hand muscle exercise equipment based on natural rubber for elderly
บทบาท: หัวหน้าโครงการ, 2563

สมบัติของยางธรรมชาติผสมเถ้าลอยจากโรงไฟฟ้าชีวมวลจากไม้ยางพาราและการนำไปใช้ประโยชน์
Properties of natural rubber/fly ash composites from biomass power plants and their utilization
บทบาท: ผู้ร่วมวิจัย, 2562

การพัฒนาโฟมพอลิบิวทิลีนซัคซิเนตผสมยางธรรมชาติสำหรับใช้งานเป็นบรรจุภัณฑ์ในการขนส่ง
Development of poly(butylene succinate)/natural rubber blend based foams for using as transport packaging
บทบาท: หัวหน้าโครงการ, 2562

PAGE-2

ฉนวนโฟมกันความร้อนและทนไฟที่เป็นมิตรกับสิ่งแวดล้อมจากยางผสมระหว่างยางพอลีเอทิลีนออกทีนและยางธรรมชาติ
Eco-friendly Flame Retardant Insulation Foam based on Polyethylene-octene elastomer (POE)/Natural Rubber (NR) Blends
บทบาท: หัวหน้าโครงการ, 2561

การพัฒนายางเบลนด์ทนไฟจากยางธรรมชาติเพื่อใช้งานเป็นฉนวนหุ้มสายไฟและสายเคเบิ้ล
Development of flame retarded blends based on natural rubber for wire and cable insulation
บทบาท: หัวหน้าโครงการ, 2561

แผ่นฉนวนกันความร้อนและป้องกันไฟผลิตจากยางธรรมชาติอิพอกไซด์ผสมกับเอทิลีนไวนิลอะซิเตท
Flame Retardant Insulation Sheet Based on Blend of Epoxidized Natural Rubber (ENR) and Ethylene-Vinyl Acetate (EVA)
บทบาท: หัวหน้าโครงการ, 2561

การเสริมประสิทธิภาพการทนไฟของโฟมฉนวนกันความร้อนจากวัสดุคอมโพสิทนาโน
Fire retardancy enhancement of thermal insulating nanocomposites foams
บทบาท: หัวหน้าโครงการ, 2561

การเพิ่มประสิทธิภาพการทนไฟและการใช้งานของพอลิเอทิลีนความหนาแน่นสูงในชิ้นส่วนอุปกรณ์ไฟฟ้าและอิเลกทรอนิกส์
Enhancement in fire retardant and applications of high density polyethylene for electrical and electronic components
บทบาท: หัวหน้าโครงการ, 2560

PAGE-3

เทอร์โมพลาสติกวัลคาไนซ์เพื่อสิ่งแวดล้อมจากการผสมยางธรรมชาติกับพอลิพรอพิลีนสำหรับการใช้งานเฉพาะด้าน
“Green” TPVs based on Natural Rubber/Polypropylene Blends for Specific Applications
บทบาท: ผู้ร่วมวิจัย, 2559

การพัฒนาเทอร์โมพลาสติกวัลคาไนซ์ทนไฟที่เป็นมิตรกับสิ่งแวดล้อมจากวัสดุผสมระหว่างยางธรรมชาติอิพอกไซด์และพอลิพรอพิลีน
Development of Environmentally Friendly Flame Retardant Thermoplastic Vulcanizates from Blend of Epoxidized Natural rubber/Polypropylene
บทบาท: หัวหน้าโครงการย่อย, 2559

การพัฒนายางทนไฟจากยางธรรมชาติอิพอกไซด์/เอทิลีนไวนิลอะซิเตท/แมกนีเซียมไฮดรอกไซด์ เพื่อประยุกต์ใช้ในงานปลอกหุ้มสายไฟและสายเคเบิ้ล
Development of flame retardant rubber from epoxidized natural rubber/ethylene-vinyl acetate/magnesium hydroxide for wire and cable application
บทบาท: หัวหน้าโครงการ, 2559

การเตรียมและศึกษาสมบัติของยางเบลนด์ทนไฟปราศจากฮาโลเจนจากยางอีพีดีเอ็มและยางธรรมชาติ เพื่อประยุกต์ใช้ในผลิตภัณฑ์ชิ้นส่วนยานยนต์
Preparation and Characteristics of Halogen Free Flame Retardant EPDM/NR Rubber Blends for Automotive Part Application
บทบาท: หัวหน้าโครงการ, 2558

พื้นกระเบื้องยางเพื่อสิ่งแวดล้อมจากการเบลนด์ยางธรรมชาติโปรตีนต่ำกับเอทีลินไวนิลอะซิเตท
Eco-friendly floor tile rubber based on deproteinized natural rubber (DPNR) and ethylene vinyl acetate (EVA) blends
บทบาท: หัวหน้าโครงการ, 2557

PAGE-4

ต้นแบบท่อน้ำหยดสหรับการเกษตรจากยางธรรมชาติเบลนด์กับยางรีไซเคิล
Prototype of dripping hose for agriculture based on Natural Rubber and recycled rubber blends
บทบาท: หัวหน้าโครงการ, 2557

การปรับปรุงโครงสร้างและสมบัติของโฟมคอมโพสิทนาโนที่ใช้เบลนด์ของพอลิเอทิลีนไวนิลอะซีเตทกับยางธรรมชาติและนาโนเคลย์
Structure and Property Improvement of Nanocomposite Foams Based on Blend of Ethylene-Vinyl Acetate (EVA)/Natural Rubber (NR)/ Nanoclay
บทบาท: หัวหน้าโครงการ, 2557

เทอร์โมพลาสติกอิลาสโตเมอร์จากการเบลนด์ยางธรรมชาติอิพอกไซด์กับเอทิลีนไวนิลอะซิเตทสำหรับการใช้อุดกันรั่ว
Thermoplastic elastomer based on epoxidized natural rubber (ENR) and ethylene vinyl acetate (EVA) blends for sealant application
บทบาท: ผู้ร่วมวิจัย, 2557

การเพิ่มประสิทธิภาพการทนความร้อนและการหน่วงไฟของเทอร์โมพลาสติกวัลคาไนซ์ทนไฟปราศจากฮาโลเจนจากเบลนด์ของยางธรรมชาติ พอลิโพรไพลีนและอะลูมิเนียมไตรไฮเดรต
Improvement of Thermal and Flame Retardant Properties of Halogen-Free Flame Retardant Thermoplastic Vulcanizate from Natural rubber/Polypropylene/aluminium trihydrate Blends
บทบาท: หัวหน้าโครงการ, 2557

การปรับปรุงสมบัติของเทอร์โมพลาสติกอิลาสโตเมอร์ทนไฟจากเบลนด์ของพอลีโพรไพลีนและยางธรรมชาติด้วยนาโนเคลย์
Property improvement of flame retarded thermoplastic vulcanizates from polypropylene/natural rubber blends using nanoclay
บทบาท: หัวหน้าโครงการ, 2555

PAGE-5

การพัฒนาวัสดุทดแทนหนังจากคอมโพสิทของยางธรรมชาติ/เอทิลีนไวนิลอะซิเตทผสม ผงหนัง
Artificial leather based on NR/EVA/Leather composites
บทบาท: ผู้ร่วมวิจัย, 2554

การเตรียมและการวิเคราะห์น้ำมันแปรรูปยางจากน้ำมันพืช (น้ำมันปาล์ม น้ำมันถั่วเหลือง และน้ำมันทานตะวัน) ที่ดัดแปรโดยอะนิลีนและเมทิลเอสเทอร์ของกรดไขมันของน้ำมันพืชที่ดัดแปรโดยสารประกอบอะโรมาติกเอมีน
Preparation and characterization of processing oils based on vegetable oils (palm, soybean and sun flower oil) modified by aniline and methyl ester of fatty acid from vegetable oils modified by aromatic amine compounds
บทบาท: ผู้ร่วมวิจัย, 2553

การผลิตโฟมยางชนิดนาโนคอมโพสิทจากยางธรรมชาติเบลนด์ร่วมกับเอทิลีนไวนิลอะซีเตทและชั้นซิลิเกต
Preparation of nanocomposite foams based on natural rubber (NR)/ ethylene-vinyl acetate (EVA) blends and layered silicate.
บทบาท: หัวหน้าโครงการ, 2553

การเตรียมเยื่อบางแลกเปลี่ยนประจุจากยางธรรมชาติดัดแปลงทางเคมีสำหรับใช้ในเซลล์เชื้อเพลิง
Preporation of ion exchange membrane from chemically modified natural rubber for fuel cell opplications.
บทบาท: ผู้ร่วมวิจัย, 2552

ผลของซิลิกาและเคลย์ต่อสมบัติการไหล สมบัติเชิงกลและเชิงความร้อนของเทอร์โมพลาสติกวัลคาไนซ์จากการเบลนด์ยางธรรมชาติอิพอกไซด์กับพอลิโพรไพลีน
Effect of silica and Clay on Rheological, Mechanical and Thermal Properties of Thermoplastic Vulcaniztes based on Epoxidized Natural Rubber and Polyprends.
บทบาท: ผู้ร่วมวิจัย, 2552

PAGE-6

อิทธิพลของชั้นซิลิเกตต่อสมบัติการไหล สมบัติเชิงกลและความต้านทานต่อความร้อนของเทอร์โมพลาสติกวัลคาไนซ์จากการเบลนด์ยางธรรมชาติพอลิโพรไพลีน
Effect of Nanoclay on Rhelogical, Mechanical Properties and Heat resistance of Thermoplastic Vulcanizate Based on Epoxidized Natural Rubber and Plypronds.
บทบาท: หัวหน้าโครงการย่อย, 2552

การเตรียมและสมบัติของวัสดุประกอบย่อยสลายทางชีวภาพจากแป้งข้าวเจ้าและเส้นใยปอ
Preparation and properties of biodegradable composites based on rice starch and jute fiber
บทบาท: หัวหน้าโครงการ, 2549

การศึกษาพฤติกรรมการวัลคาไนซ์ และสมบัติเชิงกลของคอมโพสิทแบบผสมยางธรรมชาติเสริมแรงด้วยเส้นใยสับปะรดและมะพร้าว

บทบาท: หัวหน้าโครงการ, 2548

การศึกษาวัสดุเชิงประกอบของเส้นใยธรรมชาติกับยางธรรมชาติ
A Study of natural Fibers/natural rubber composites.
บทบาท: หัวหน้าโครงการ, 2547

WoS/ISI Papers

56

ISI papers

📘

PAGE-1

Jarnthong, M, Wannalak, A, Masa, A, Thongnuanchan, B, Saito, H, Soontaranon, S, Sakai, T and Lopattananon, N. (2025). Nanocellulose reinforcement of epoxidized natural rubber: Enhancing strain-induced crystallization for high-performance bio-composites. POLYMER COMPOSITES
Cited: 0 doi: https://doi.org/10.1002/pc.29594

Bunsanong, A, Thongnuanchan, B, Ninjan, R, Salaeh, S, Lopattananon, N and Masa, A. (2024). Accelerator and zinc-free prevulcanized latex based on natural rubber-bearing benzyl chloride groups. EXPRESS POLYMER LETTERS, 18(2), 229-242.
Cited: 6 doi: https://doi.org/10.3144/expresspolymlett.2024.16

Ninjan, R, Thongnuanchan, B, Lopattananon, N, Salaeh, S, Tongnuanchan, P and Buangam, P. (2024). Heat-sealable paper fabricated using a latex coating based on modified natural rubber filled with gelatin. EXPRESS POLYMER LETTERS, 18(11), 1077-1093.
Cited: 0 doi: https://doi.org/10.3144/expresspolymlett.2024.83

Jarnthong, M, Lopattananon, N, Li, YZ, Yu, HP, Wang, R, Wang, YQ, Liu, HC, Liao, LS and Peng, Z. (2024). Performance of Moringa Oil as an Effective Bioplasticizer on Static and Dynamic Mechanical Properties of Natural Rubber Vulcanizates. ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 12(16), 6440-6450.
Cited: 5 doi: https://doi.org/10.1021/acssuschemeng.4c01672

Nakason, C, Manleh, C, Lopattananon, N and Kaesaman, A. (2024). The influence of crosslink characteristics on key properties of dynamically cured NR/PP blends. EXPRESS POLYMER LETTERS, 18(5), 487-503.
Cited: 4 doi: https://doi.org/10.3144/expresspolymlett.2024.36

Ninjan, R, Thongnuanchan, B, Lopattananon, N, Salaeh, S and Thitithammawong, A. (2024). Thermally assisted healable film based on modified natural rubber-bearing benzyl chloride functionality. EXPRESS POLYMER LETTERS, 18(7), 742-759.
Cited: 1 doi: https://doi.org/10.3144/expresspolymlett.2024.55

Wongvasana, B, Thongnuanchan, B, Masa, A, Saito, H, Sakai, T and Lopattananon, N. (2023). Reinforcement Behavior of Chemically Unmodified Cellulose Nanofiber in Natural Rubber Nanocomposites. POLYMERS, 15(5)
Cited: 17 doi: https://doi.org/10.3390/polym15051274

Wongvasana, B, Thongnuanchan, B, Masa, A, Saito, H, Sakai, T and Lopattananon, N. (2023). Structure-Property Correlation in Natural Rubber Nanocomposite Foams: A Comparison between Nanoclay and Cellulose Nanofiber Used as Nanofillers. POLYMERS, 15(21)
Cited: 2 doi: https://doi.org/10.3390/polym15214223

Ninjan, R, Thongnuanchan, B, Lopattananon, N and Nakason, C. (2022). Anti-rust primer for steel based on natural rubber bearing methacrylic functionality. EXPRESS POLYMER LETTERS, 16(6), 573-590.
Cited: 3 doi: https://doi.org/10.3144/expresspolymlett.2022.43

Wongvasana, B, Thongnuanchan, B, Masa, A, Saito, H, Sakai, T and Lopattananon, N. (2022). Comparative Structure-Property Relationship between Nanoclay and Cellulose Nanofiber Reinforced Natural Rubber Nanocomposites. POLYMERS, 14(18)
Cited: 8 doi: https://doi.org/10.3390/polym14183747

PAGE-2

Walong, A, Thongnuanchan, B, Uthaipan, N, Sakai, T and Lopattananon, N. (2022). Enhancing cellular structure, mechanical properties, thermal stability and flame retardation of EVA/NR blend nanocomposite foams by silicon dioxide-based flame retardant. PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY, 38(1), 70-88.
Cited: 7 doi: https://doi.org/10.1177/14777606211042028

Nontasak, W, Thongnuanchan, B, Ninjan, R, Lopattananon, N, Wannavilai, P and Nakason, C. (2021). Fire-retardant wood coating based on natural rubber bearing methacrylic functionality. JOURNAL OF POLYMER ENGINEERING, 41(1), 44-53.
Cited: 6 doi: https://doi.org/10.1515/polyeng-2020-0092

Walong, A, Thongnuanchan, B, Sakai, T and Lopattananon, N. (2021). Influence of silicon dioxide addition and processing methods on structure, thermal stability and flame retardancy of EVA/NR blend nanocomposite foams. PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY, 37(1), 49-65.
Cited: 9 doi: https://doi.org/10.1177/1477760620953437

Ninjan, R, Thongnuanchan, B, Lopattananon, N, Thitithammawong, A and Nakason, C. (2021). Rubber-to-steel adhesives based on natural rubber grafted with poly(acetoacetoxyethyl methacrylate). JOURNAL OF POLYMER ENGINEERING, 41(3), 192-201.
Cited: 3 doi: https://doi.org/10.1515/polyeng-2020-0156

Jarnthong, M, Peng, Z, Lopattananon, N and Nakason, C. (2021). The influence of pre-compounding techniques and surface modification of nano-silica on the properties of thermoplastic natural rubber. EXPRESS POLYMER LETTERS, 15(12), 1135-1147.
Cited: 6 doi: https://doi.org/10.3144/expresspolymlett.2021.92

Sawangpet, K, Walong, A, Thongnuanchan, B, Kaesaman, A, Sakai, T and Lopattananon, N. (2020). Foaming and Physical Properties, Flame Retardancy, and Combustibility of Polyethylene Octene Foams Modified by Natural Rubber and Expandable Graphite. JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 26(4), 423-433.
Cited: 18 doi: https://doi.org/10.1002/vnl.21757

Sawangpet, K, Walong, A, Kaesaman, A, Thongnuanchan, B, Sakai, T and Lopattananon, N. (2020). Structure, physical properties, and flame retardancy of POE/NR/EG blend foams: Effect of crosslinking. MALAYSIAN JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES, 16(1), 44-50.
Cited: 1

Ninjan, R, Thongnuanchan, B, Lopattananon, N, Thitithammawong, A and Nakason, C. (2019). Ambient curable latex films and adhesives based on natural rubber bearing Acetoacetoxy functionality. POLYMERS FOR ADVANCED TECHNOLOGIES, 30(3), 598-607.
Cited: 7 doi: https://doi.org/10.1002/pat.4496

Thongnuanchan, B, Nantayos, W, Lopattananon, N, Rattanapan, S, Thitithammawong, A and Nakason, C. (2019). New Thermoplastic Vulcanizate Based on Acetoacetoxy Functionalized Natural Rubber/Polyamide12 Blend Filled with Carbon Black. JOURNAL OF POLYMERS AND THE ENVIRONMENT, 27(8), 1807-1820.
Cited: 8 doi: https://doi.org/10.1007/s10924-019-01475-2

Lopattananon, N, Julyanon, J, Masa, A and Thongnuanchan, B. (2018). Effect of the Addition of ENR on Foam Properties of EVA/NR/Clay Nanocomposites. INTERNATIONAL POLYMER PROCESSING, 33(1), 42-51.
Cited: 6 doi: https://doi.org/10.3139/217.3358

PAGE-3

Thongnuanchan, B, Ninjan, R, Kalkornsurapranee, E, Lopattananon, N and Nakason, C. (2018). Glutaraldehyde as Ambient Temperature Crosslinking Agent of Latex Films from Natural Rubber Grafted with Poly(diacetone acrylamide). JOURNAL OF POLYMERS AND THE ENVIRONMENT, 26(7), 3069-3085.
Cited: 14 doi: https://doi.org/10.1007/s10924-018-1193-8

Lopattananon, N, Walong, A and Sakai, T. (2018). Influence of incorporation methods of ATH on microstructure, elastomeric properties, flammability, and thermal decomposition of dynamically vulcanized NR/PP blends. JOURNAL OF APPLIED POLYMER SCIENCE, 135(18)
Cited: 14 doi: https://doi.org/10.1002/app.46231

Masa, A, Saito, H, Sakai, T, Kaesaman, A and Lopattananon, N. (2017). Morphological evolution and mechanical property enhancement of natural rubber/polypropylene blend through compatibilization by nanoclay. JOURNAL OF APPLIED POLYMER SCIENCE, 134(10)
Cited: 20 doi: https://doi.org/10.1002/app.44574

Jarnthong, M, Peng, Z, Lopattananon, N and Nakason, C. (2017). Nanosilica-Reinforced Epoxidized Natural Rubber Nanocomposites: Effect of Epoxidation Level on Morphological and Mechanical Properties. POLYMER COMPOSITES, 38(6), 1151-1157.
Cited: 14 doi: https://doi.org/10.1002/pc.23678

Saramolee, P, Sahakaro, K, Lopattananon, N, Dierkes, WK and Noordermeer, JWM. (2016). Compatibilisation of Silica-filled Natural Rubber Compounds by Functionalised Low Molecular Weight Polymer. JOURNAL OF RUBBER RESEARCH, 19(1), 28-42.
Cited: 7

Saramolee, P, Sahakaro, K, Lopattananon, N, Dierkes, WK and Noordermeer, JWM. (2016). Compatibilization of silica-filled natural rubber compounds by combined effects of functionalized low molecular weight rubber and silane. JOURNAL OF ELASTOMERS AND PLASTICS, 48(2), 145-163.
Cited: 16 doi: https://doi.org/10.1177/0095244314568469

Lopattananon, N, Walong, A, Kaesaman, A and Seadan, M. (2016). Effect of MAH-g-PP on the Performance of ATH filled NR/PP Thermoplastic Vulcanisates. JOURNAL OF RUBBER RESEARCH, 19(4), 243-260.
Cited: 3

Toh-ae, P, Junhasavasdikul, B, Lopattananon, N and Sahakaro, K. (2016). Mechanical properties and stability towards heat and UV irradiation of natural rubber/nanotitanium dioxide composites. 5TH INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS, MINERALS AND ENVIRONMENT (RAMM) & 2ND INTERNATIONAL POSTGRADUATE CONFERENCE ON MATERIALS, MINERAL AND POLYMER (MAMIP), 19, 139-147.
Cited: 2 doi: https://doi.org/10.1016/j.proche.2016.03.001

Masa, A, Saito, R, Saito, H, Sakai, T, Kaesaman, A and Lopattananon, N. (2016). Phenolic resin-crosslinked natural rubber/clay nanocomposites: Influence of clay loading and interfacial adhesion on strain-induced crystallization behavior. JOURNAL OF APPLIED POLYMER SCIENCE, 133(12)
Cited: 24 doi: https://doi.org/10.1002/app.43214

Masa, A, Iimori, S, Saito, R, Saito, H, Sakai, T, Kaesaman, A and Lopattananon, N. (2015). Strain-induced crystallization behavior of phenolic resin crosslinked natural rubber/clay nanocomposites. JOURNAL OF APPLIED POLYMER SCIENCE, 132(39)
Cited: 23 doi: https://doi.org/10.1002/app.42580

PAGE-4

Saiwari, S, Waesateh, K, Lopattananon, N, Thititammawong, A and Kaesaman, A. (2015). Study on Reuse of Diphenyl Disulfide-Devulcanized Natural Rubber from Truck Tires. MACROMOLECULAR SYMPOSIA, 354(1), 155-162.
Cited: 2 doi: https://doi.org/10.1002/masy.201400103

Lopattananon, N, Julyanon, J, Masa, A, Kaesaman, A, Thongpin, C and Sakai, T. (2015). The role of nanofillers on (natural rubber)/(ethylene vinyl acetate)/clay nanocomposite in blending and foaming. JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 21(2), 134-146.
Cited: 20 doi: https://doi.org/10.1002/vnl.21368

Saramolee, P, Sahakaro, K, Lopattananon, N, Dierkes, WK and Noordermeer, JWM. (2014). COMPARATIVE PROPERTIES OF SILICA- AND CARBON BLACK-REINFORCED NATURAL RUBBER IN THE PRESENCE OF EPOXIDIZED LOW MOLECULAR WEIGHT POLYMER. RUBBER CHEMISTRY AND TECHNOLOGY, 87(2), 320-339.
Cited: 27 doi: https://doi.org/10.5254/rct.13.86970

Inted, S, Lopattananon, N, Thongnuanchan, B and Kaesaman, A. (2014). Comparative study of NR/BR/PP and NR/NBR/PP ternary blends for high abrasion resistant thermoplastic vulcanizates. ADVANCES IN RUBBER, 844, 131-134.
Cited: 3 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.131

Lopattananon, N, Tanglakwaraskul, S, Kaesaman, A, Seadan, M and Sakai, T. (2014). Effect of Nanoclay Addition on Morphology and Elastomeric Properties of Dynamically Vulcanized Natural Rubber/Polypropylene Nanocomposites. INTERNATIONAL POLYMER PROCESSING, 29(3), 332-341.
Cited: 14 doi: https://doi.org/10.3139/217.2935

Lopattananon, N, Wangpradit, N, Nakason, C and Kaesaman, A. (2014). Effect of Rubber Composition on Foaming and Properties of EVA/NR/PP Thermoplastic Vulcanisates (TPVs). JOURNAL OF RUBBER RESEARCH, 17(2), 80-95.
Cited: 8

Jarnthong, M, Nakason, C, Peng, Z and Lopattananon, N. (2014). Influence of Surface Modification and Content of Nanosilica on Dynamic Mechanical Properties of Epoxidized Natural Rubber Nanocomposites. ADVANCES IN RUBBER, 844, 289-+.
Cited: 5 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.289

Saramolee, P, Lopattananon, N and Sahakaro, K. (2014). Preparation and some properties of modified natural rubber bearing grafted poly(methyl methacrylate) and epoxide groups. EUROPEAN POLYMER JOURNAL, 56, 1-10.
Cited: 52 doi: https://doi.org/10.1016/j.eurpolymj.2014.04.008

Walong, A, Kaesaman, A, Sakai, T and Lopattananon, N. (2014). Properties of Fire Retardant Thermoplastic Vulcanizates from NR/PP Blends Filled with Aluminium Trihydrate and Magnesium Hydroxide with Reference to the Effect of Mixing Methods. ADVANCES IN RUBBER, 844, 297-+.
Cited: 4 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.297

Manleh, C, Nakason, C, Lopattananon, N and Kaesaman, A. (2014). Properties of Thermoplastic Natural Rubber (TPNR): Influence of Polypropylene Grades on TPNR Properties. ADVANCES IN RUBBER, 844, 127-130.
Cited: 3 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.127

PAGE-5

Saramolee, P, Sahakaro, K, Lopattananon, N, Dierkes, WK and Noordermeer, JWM. (2014). Property Enhancement of Silica-filled Natural Rubber Compatibilized with Epoxidized Low Molecular Weight Rubber by Extra Sulfur. ADVANCES IN RUBBER, 844, 235-+.
Cited: 1 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.235

Toh-ae, P, Junhasavasdikul, B, Lopattananon, N and Sahakaro, K. (2014). Surface Modification of TiO2 Nanoparticles by Grafting with Silane Coupling Agent. ADVANCES IN RUBBER, 844, 276-+.
Cited: 12 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.276

Toh-Ae, P, Pongprayoon, T, Lopattananon, N and Sahakaro, K. (2013). Comparison of Properties of Admicellar Polymerization Surface Modified Silica- and Conventional Fillers-Reinforced Tyre Tread Compounds. ASIAN JOURNAL OF CHEMISTRY, 25(9), 5226-5232.
Cited: 2 doi: https://doi.org/10.14233/ajchem.2013.F23

Lopattananon, N, Tanglakwaraskul, S, Kaesaman, A, Seadan, M and Sakai, T. (2013). Partially Dynamically Vulcanized Thermoplastic Elastomer Based on Natural Rubber-Polypropylene-Clay Nanocomposites. MULTI-FUNCTIONAL MATERIALS AND STRUCTURES IV, 747, 230-+.
Cited: 0 doi: https://doi.org/10.4028/www.scientific.net/AMR.747.230

Saramolee, P, Sahakaro, K, Lopattananon, N, Dierkes, WK and Noordermeer, JWM. (2013). Silica-Reinforced Natural Rubber with Epoxidized Low Molecular Weight Rubber as a Compatibilizer. MULTI-FUNCTIONAL MATERIALS AND STRUCTURES IV, 747, 522-+.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.747.522

Lopattananon, N, Thongpin, C and Sombatsompop, N. (2012). Bioplastics from Blends of Cassava and Rice Flours: The Effect of Blend Composition. INTERNATIONAL POLYMER PROCESSING, 27(3), 334-340.
Cited: 7 doi: https://doi.org/10.3139/217.2532

Manleh, C, Nakason, C, Lopattananon, N and Kaesaman, A. (2012). Effect of Sulfur Donor on Properties of Thermoplastic Vulcanizates based on NR/PP. ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY, 626, 54-57.
Cited: 4 doi: https://doi.org/10.4028/www.scientific.net/AMR.626.54

Jarnthong, M, Nakason, C, Lopattananon, N and Peng, Z. (2012). Influence of incorporation sequence of silica nanoparticles on morphology, crystallization behavior, mechanical properties, and thermal resistance of melt blended thermoplastic natural rubber. POLYMER COMPOSITES, 33(11), 1911-1920.
Cited: 18 doi: https://doi.org/10.1002/pc.22331

Jarnthong, M, Nakason, C, Peng, Z and Lopattananon, N. (2012). Nano-sized silica Reinforcement of Epoxidized Natural Rubber Prepared in Latex State. ADVANCED MATERIALS, PTS 1-3, 415-417, 112-+.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.415-417.112

Lopattananon, N, Jitkalong, D and Seadan, M. (2011). Hybridized Reinforcement of Natural Rubber with Silane-Modified Short Cellulose Fibers and Silica. JOURNAL OF APPLIED POLYMER SCIENCE, 120(6), 3242-3254.
Cited: 47 doi: https://doi.org/10.1002/app.33374

PAGE-6

Jarnthong, M, Peng, Z, Nakason, C and Lopattananon, N. (2010). Surface Modification of Silica Nanoparticles for Reinforcement of Epoxidized Natural Rubber. FUNCTIONALIZED AND SENSING MATERIALS, 93-94, 370-+.
Cited: 6 doi: https://doi.org/10.4028/www.scientific.net/AMR.93-94.370

Lopattananon, N, Songkaew, S, Thongruang, W and Seadan, M. (2009). Sustainable Biocomposites from Rice Flour and Sisal Fiber: Effect of Fiber Loading, Length and Alkali Treatment. INTERNATIONAL POLYMER PROCESSING, 24(3), 272-279.
Cited: 4 doi: https://doi.org/10.3139/217.2258

Lopattananon, N, Payae, Y and Seadan, M. (2008). Influence of fiber modification on interfacial adhesion and mechanical properties of pineapple leaf fiber-epoxy composites. JOURNAL OF APPLIED POLYMER SCIENCE, 110(1), 433-443.
Cited: 50 doi: https://doi.org/10.1002/app.28496

Lopattananon, N, Boonsong, K and Seadan, M. (2007). Effects of zinc salts of sulfonated natural rubber on mechanical properties, morphology and compatibility of natural Rubber/Chlorosulfonated polyethylene blends. INTERNATIONAL POLYMER PROCESSING, 22(4), 359-367.
Cited: 0 doi: https://doi.org/10.3139/217.2011

Lopattartanon, N, Kraibut, A, Sangjan, R and Seadan, M. (2007). Ionic elastomer blends of zinc salts of maleated natural rubber and carboxylated nitrile rubber: Effect of grafted maleic anhydride. JOURNAL OF APPLIED POLYMER SCIENCE, 105(3), 1444-1455.
Cited: 6 doi: https://doi.org/10.1002/app.26312

Lopattananon, N, Panawarangkul, K, Sahakaro, K and Ellis, B. (2006). Performance of pineapple leaf fiber-natural rubber composites: The effect of fiber surface treatments. JOURNAL OF APPLIED POLYMER SCIENCE, 102(2), 1974-1984.
Cited: 168 doi: https://doi.org/10.1002/app.24584

Scopus Papers

66

Scopus Papers

📘

PAGE-1

Jarnthong M., , Masa A., Thongnuanchan B., Saito H., Soontaranon S., Sakai T. and Lopattananon N. (2025). Nanocellulose reinforcement of epoxidized natural rubber: Enhancing strain-induced crystallization for high-performance bio-composites. Polymer Composites
Cited: 0 doi: https://doi.org/10.1002/pc.29594

Bunsanong A., Thongnuanchan B., Ninjan R., Salaeh S., Lopattananon N. and Masa A. (2024). Accelerator and zinc-free prevulcanized latex based on natural rubber-bearing benzyl chloride groups. Express Polymer Letters, 18(2), 229-242.
Cited: 0 doi: https://doi.org/10.3144/expresspolymlett.2024.16

Ninjan R., Thongnuanchan B., Lopattananon N., Salaeh S., Tongnuanchan P. and Buangam P. (2024). Heat-sealable paper fabricated using a latex coating based on modified natural rubber filled with gelatin. Express Polymer Letters, 18(11), 1077-1093.
Cited: 0 doi: https://doi.org/10.3144/expresspolymlett.2024.83

Jarnthong M., Lopattananon N., Li Y., Yu H., Wang R., Wang Y., Liu H., Liao L. and Peng Z. (2024). Performance of Moringa Oil as an Effective Bioplasticizer on Static and Dynamic Mechanical Properties of Natural Rubber Vulcanizates. ACS Sustainable Chemistry and Engineering
Cited: 0 doi: https://doi.org/10.1021/acssuschemeng.4c01672

Nakason C., Manleh C., Lopattananon N. and Kaesaman A. (2024). The influence of crosslink characteristics on key properties of dynamically cured NR/PP blends. Express Polymer Letters, 18(5), 487-503.
Cited: 0 doi: https://doi.org/10.3144/expresspolymlett.2024.36

Ninjan R., Thongnuanchan B., Lopattananon N., Salaeh S. and Thitithammawong A. (2024). Thermally assisted healable film based on modified natural rubber-bearing benzyl chloride functionality. Express Polymer Letters, 18(7), 742-759.
Cited: 0 doi: https://doi.org/10.3144/expresspolymlett.2024.55

Wongvasana B., Thongnuanchan B., Masa A., Saito H., Sakai T. and Lopattananon N. (2023). Reinforcement Behavior of Chemically Unmodified Cellulose Nanofiber in Natural Rubber Nanocomposites. Polymers, 15(5)
Cited: 0 doi: https://doi.org/10.3390/polym15051274

Wongvasana B., Thongnuanchan B., Masa A., Saito H., Sakai T. and Lopattananon N. (2023). Structure–Property Correlation in Natural Rubber Nanocomposite Foams: A Comparison between Nanoclay and Cellulose Nanofiber Used as Nanofillers. Polymers, 15(21)
Cited: 0 doi: https://doi.org/10.3390/polym15214223

Ninjan R., Thongnuanchan B., Lopattananon N. and Nakason C. (2022). Anti-rust primer for steel based on natural rubber bearing methacrylic functionality. Express Polymer Letters, 16(6), 573-590.
Cited: 0 doi: https://doi.org/10.3144/expresspolymlett.2022.43

Wongvasana B., Thongnuanchan B., Masa A., Saito H., Sakai T. and Lopattananon N. (2022). Comparative Structure–Property Relationship between Nanoclay and Cellulose Nanofiber Reinforced Natural Rubber Nanocomposites. Polymers, 14(18)
Cited: 0 doi: https://doi.org/10.3390/polym14183747

PAGE-2

Walong A., Thongnuanchan B., Uthaipan N., Sakai T. and Lopattananon N. (2022). Enhancing cellular structure, mechanical properties, thermal stability and flame retardation of EVA/NR blend nanocomposite foams by silicon dioxide-based flame retardant. Progress in Rubber, Plastics and Recycling Technology, 38(1), 70-88.
Cited: 0 doi: https://doi.org/10.1177/14777606211042028

Nontasak W., Thongnuanchan B., Ninjan R., Lopattananon N., Wannavilai P. and Nakason C. (2021). Fire-retardant wood coating based on natural rubber bearing methacrylic functionality. Journal of Polymer Engineering, 41(1), 44-53.
Cited: 4 doi: https://doi.org/10.1515/polyeng-2020-0092

Walong A., Thongnuanchan B., Sakai T. and Lopattananon N. (2021). Influence of silicon dioxide addition and processing methods on structure, thermal stability and flame retardancy of EVA/NR blend nanocomposite foams. Progress in Rubber, Plastics and Recycling Technology, 37(1), 49-65.
Cited: 3 doi: https://doi.org/10.1177/1477760620953437

Ninjan R., Thongnuanchan B., Lopattananon N., Thitithammawong A. and Nakason C. (2021). Rubber-to-steel adhesives based on natural rubber grafted with poly(acetoacetoxyethyl methacrylate). Journal of Polymer Engineering, 41(3), 192-201.
Cited: 1 doi: https://doi.org/10.1515/polyeng-2020-0156

Jarnthong M., Peng Z., Lopattananon N. and Nakason C. (2021). The influence of pre-compounding techniques and surface modification of nano-silica on the properties of thermoplastic natural rubber. Express Polymer Letters, 15(12), 1135-1147.
Cited: 2 doi: https://doi.org/10.3144/expresspolymlett.2021.92

Sawangpet K., Walong A., Thongnuanchan B., Kaesaman A., Sakai T. and Lopattananon N. (2020). Foaming and Physical Properties, Flame Retardancy, and Combustibility of Polyethylene Octene Foams Modified by Natural Rubber and Expandable Graphite. Journal of Vinyl and Additive Technology, 26(4), 423-433.
Cited: 1 doi: https://doi.org/10.1002/vnl.21757

Sawangpet K., Walong A., Kaesaman A., Thongnuanchan B., Sakai T. and Lopattananon N. (2020). Structure, physical properties, and flame retardancy of POE/NR/EG blend foams: Effect of crosslinking. Malaysian Journal of Fundamental and Applied Sciences, 16(1), 44-50.
Cited: 1 doi: https://doi.org/10.11113/mjfas.v16n1.1418

Ninjan R., Thongnuanchan B., Lopattananon N., Thitithammawong A. and Nakason C. (2019). Ambient curable latex films and adhesives based on natural rubber bearing Acetoacetoxy functionality. Polymers for Advanced Technologies, 30(3), 598-607.
Cited: 6 doi: https://doi.org/10.1002/pat.4496

Lopattananon N., Walong A., Kaesaman A. and Sakai T. (2019). Mechanical, thermal and fire retardant characteristics of NR/PP/ATH thermoplastic vulcanizates. Walailak Journal of Science and Technology, 16(10), 723-737.
Cited: 1

Thongnuanchan B., Nantayos W., Lopattananon N., Rattanapan S., Thitithammawong A. and Nakason C. (2019). New Thermoplastic Vulcanizate Based on Acetoacetoxy Functionalized Natural Rubber/Polyamide12 Blend Filled with Carbon Black. Journal of Polymers and the Environment, 27(8), 1807-1820.
Cited: 3 doi: https://doi.org/10.1007/s10924-019-01475-2

PAGE-3

Lopattananon N., Julyanon J., Masa A. and Thongnuanchan B. (2018). Effect of the addition of ENR on foam properties of EVA/NR/Clay nanocomposites. International Polymer Processing, 33(1), 42-51.
Cited: 5 doi: https://doi.org/10.3139/217.3358

Thongnuanchan B., Ninjan R., Kalkornsurapranee E., Lopattananon N. and Nakason C. (2018). Glutaraldehyde as Ambient Temperature Crosslinking Agent of Latex Films from Natural Rubber Grafted with Poly(diacetone acrylamide). Journal of Polymers and the Environment, 26(7), 3069-3085.
Cited: 8 doi: https://doi.org/10.1007/s10924-018-1193-8

Lopattananon N., Walong A. and Sakai T. (2018). Influence of incorporation methods of ATH on microstructure, elastomeric properties, flammability, and thermal decomposition of dynamically vulcanized NR/PP blends. Journal of Applied Polymer Science, 135(18)
Cited: 13 doi: https://doi.org/10.1002/app.46231

Masa A., Saito H., Sakai T., Kaesaman A. and Lopattananon N. (2017). Morphological evolution and mechanical property enhancement of natural rubber/polypropylene blend through compatibilization by nanoclay. Journal of Applied Polymer Science, 134(10)
Cited: 17 doi: https://doi.org/10.1002/app.44574

Jarnthong M., Peng Z., Lopattananon N. and Nakason C. (2017). Nanosilica-reinforced Epoxidized natural rubber nanocomposites: Effect of Epoxidation level on morphological and mechanical properties. Polymer Composites, 38(6), 1151-1157.
Cited: 7 doi: https://doi.org/10.1002/pc.23678

Saramolee P., Sahakaro K., Lopattananon N., Dierkes W. and Noordermeer J. (2016). Compatibilisation of silica-filled natural rubber compounds by functionalised low molecular weight polymer. Journal of Rubber Research, 19(1), 28-42.
Cited: 6

Saramolee P., Sahakaro K., Lopattananon N., Dierkes W. and Noordermeer J. (2016). Compatibilization of silica-filled natural rubber compounds by combined effects of functionalized low molecular weight rubber and silane. Journal of Elastomers and Plastics, 48(2), 145-163.
Cited: 16 doi: https://doi.org/10.1177/0095244314568469

Lopattananon N., Walong A., Kaesaman A. and Seadan M. (2016). Effect of MAH-g-PP on the Performance of ATH filled NR/PP Thermoplastic Vulcanisates. Journal of Rubber Research, 19(4), 243-260.
Cited: 5

Masa A., Saito R., Saito H., Sakai T., Kaesaman A. and Lopattananon N. (2016). Phenolic resin-crosslinked natural rubber/clay nanocomposites: Influence of clay loading and interfacial adhesion on strain-induced crystallization behavior. Journal of Applied Polymer Science, 133(12)
Cited: 15 doi: https://doi.org/10.1002/app.43214

Sakmat J., Lopattananon N. and Kaesaman A. (2015). Effect of fiber surface modification on properties of artificial leather from leather fiber filled natural rubber composites. Key Engineering Materials, 659, 378-382.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/KEM.659.378

PAGE-4

Julyanon J., Kaesaman A., Sakai T. and Lopattananon N. (2015). Improvement of structure and properties of nanocomposite foams based on ethylene-vinyl acetate (EVA)/natural rubber (NR)/nanoclay: Effect of NR addition. Key Engineering Materials, 659, 418-422.
Cited: 5 doi: https://doi.org/10.4028/www.scientific.net/KEM.659.418

Toh-Ae P., Junhasavasdikul B., Lopattananon N. and Sahakaro K. (2015). Photocatalytic activity and properties of nanotitanium dioxide-filled natural rubber in the presence of coupling agents. Key Engineering Materials, 659, 474-478.
Cited: 0 doi: https://doi.org/10.4028/www.scientific.net/KEM.659.474

Masa A., Iimori S., Saito R., Saito H., Sakai T., Kaesaman A. and Lopattananon N. (2015). Strain-induced crystallization behavior of phenolic resin crosslinked natural rubber/clay nanocomposites. Journal of Applied Polymer Science, 132(39)
Cited: 15 doi: https://doi.org/10.1002/app.42580

Saiwari S., Waesateh K., Lopattananon N., Thititammawong A. and Kaesaman A. (2015). Study on reuse of diphenyl disulfide-devulcanized natural rubber from truck tires. Macromolecular Symposia, 354(1), 155-162.
Cited: 1 doi: https://doi.org/10.1002/masy.201400103

Lopattananon N., Julyanon J., Masa A., Kaesaman A., Thongpin C. and Sakai T. (2015). The role of nanofillers on (natural rubber)/(ethylene vinyl acetate)/clay nanocomposite in blending and foaming. Journal of Vinyl and Additive Technology, 21(2), 134-146.
Cited: 15 doi: https://doi.org/10.1002/vnl.21368

Saramolee P., Sahakaro K., Lopattananon N., Dierkes W. and Noordermeer J. (2014). Comparative properties of silica- and carbon blackreinforced natural rubber in the presence of epoxidized lowmolecular weight polymer. Rubber Chemistry and Technology, 87(2), 320-339.
Cited: 26 doi: https://doi.org/10.5254/rct.13.86970

Inted S., Lopattananon N., Thongnuanchan B. and Kaesaman A. (2014). Comparative study of NR/BR/PP and NR/NBR/PP ternary blends for high abrasion resistant thermoplastic vulcanizates. Advanced Materials Research, 844, 131-134.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.131

Lopattananon N., Tanglakwaraskul S., Kaesaman A., Seadan M. and Sakai T. (2014). Effect of nanoclay addition on morphology and elastomeric properties of dynamically vulcanized natural rubber/polypropylene nanocomposites. International Polymer Processing, 29(3), 332-341.
Cited: 15 doi: https://doi.org/10.3139/217.2935

Lopattananon N., Wangpradit N., Nakason C. and Kaesaman A. (2014). Effect of rubber composition on foaming and properties of EVA/NR/PP thermoplastic vulcanisates (TPVs). Journal of Rubber Research, 17(2), 80-95.
Cited: 12

Jarnthong M., Nakason C., Peng Z. and Lopattananon N. (2014). Influence of surface modification and content of nanosilica on dynamic mechanical properties of epoxidized natural rubber nanocomposites. Advanced Materials Research, 844, 289-292.
Cited: 4 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.289

PAGE-5

Saramolee P., Lopattananon N. and Sahakaro K. (2014). Preparation and some properties of modified natural rubber bearing grafted poly(methyl methacrylate) and epoxide groups. European Polymer Journal, 56(1), 1-10.
Cited: 38 doi: https://doi.org/10.1016/j.eurpolymj.2014.04.008

Walong A., Kaesaman A., Sakai T. and Lopattananon N. (2014). Properties of fire retardant thermoplastic vulcanizates from NR/PP blends filled with Aluminium trihydrate and magnesium hydroxide with reference to the effect of mixing methods. Advanced Materials Research, 844, 297-300.
Cited: 6 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.297

Manleh C., Nakason C., Lopattananon N. and Kaesaman A. (2014). Properties of thermoplastic natural rubber (TPNR): Influence of polypropylene grades on TPNR properties. Advanced Materials Research, 844, 127-130.
Cited: 3 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.127

Saramolee P., Sahakaro K., Lopattananon N., Dierkes W. and Noordermeer J. (2014). Property enhancement of silica-filled natural rubber compatibilized with epoxidized low molecular weight rubber by extra sulfur. Advanced Materials Research, 844, 235-238.
Cited: 1 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.235

Lopattananon N., Tanglakwaraskul S., Julyanon J., Masa A. and Sakai T. (2014). Role of nanoclay addition in structural formation of natural rubber based polyblends in MELT-Compounding. Annual Technical Conference - ANTEC, Conference Proceedings, 1(January), 66-71.
Cited: 0

Toh-Ae P., Junhasavasdikul B., Lopattananon N. and Sahakaro K. (2014). Surface modification of TiO&lt;inf&gt;2&lt;/inf&gt; nanoparticles by grafting with silane coupling agent. Advanced Materials Research, 844, 276-279.
Cited: 7 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.276

Toh-Ae P., Pongprayoon T., Lopattananon N. and Sahakaro K. (2013). Comparison of properties of admicellar polymerization surface modified silica- and conventional fillers-reinforced tyre tread compounds. Asian Journal of Chemistry, 25(9), 5226-5232.
Cited: 3 doi: https://doi.org/10.14233/ajchem.2013.f23

Manleh C., Nakason C., Lopattananon N. and Kaesaman A. (2013). Effect of sulfur donor on properties of thermoplastic vulcanizatesbased on NR/PP. Advanced Materials Research, 626, 54-57.
Cited: 1 doi: https://doi.org/10.4028/www.scientific.net/AMR.626.54

Lopattananon N., Tanglakwaraskul S., Kaesaman A., Seadan M. and Sakai T. (2013). Partially dynamically vulcanized thermoplastic elastomer based on natural rubber-polypropylene-clay nanocomposites. Advanced Materials Research, 747, 230-233.
Cited: 1 doi: https://doi.org/10.4028/www.scientific.net/AMR.747.230

Saramolee P., Sahakaro K., Lopattananon N., Dierkes W. and Noordermeer J. (2013). Silica-reinforced natural rubber with epoxidized low molecular weight rubber as a compatibilizer. Advanced Materials Research, 747, 522-525.
Cited: 1 doi: https://doi.org/10.4028/www.scientific.net/AMR.747.522

PAGE-6

Lopattananon N., Thongpin C. and Sombatsompop N. (2012). Bioplastics from blends of cassava and rice flours: The effect of blend composition. International Polymer Processing, 27(3), 334-340.
Cited: 6 doi: https://doi.org/10.3139/217.2532

Jarnthong M., Nakason C., Lopattananon N. and Peng Z. (2012). Influence of incorporation sequence of silica nanoparticles on morphology, crystallization behavior, mechanical properties, and thermal resistance of melt blended thermoplastic natural rubber. Polymer Composites, 33(11), 1911-1920.
Cited: 18 doi: https://doi.org/10.1002/pc.22331

Peng Z. and Lopattananon N. (2012). Nano-sized silica reinforcement of epoxidized natural rubber prepared in latex state. Advanced Materials Research, 415-417, 112-115.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.415-417.112

Klinpituksa P., Somkieowan S., Waehamad W. and Lopattananon N. (2012). Polymeric antioxidant based on natural rubber grafted with N-(4-hydroxyphenyl)maleimide. Advanced Materials Research, 488-489, 211-215.
Cited: 3 doi: https://doi.org/10.4028/www.scientific.net/AMR.488-489.211

Lopattananon N., Jitkalong D. and Seadan M. (2011). Hybridized reinforcement of natural rubber with silane-modified short cellulose fibers and silica. Journal of Applied Polymer Science, 120(6), 3242-3254.
Cited: 41 doi: https://doi.org/10.1002/app.33374

Jarnthong M., Peng Z., Nakason C. and Lopattananon N. (2010). Surface modification of silica nanoparticles for reinforcement of epoxidized natural rubber. Advanced Materials Research, 93-94, 370-376.
Cited: 4 doi: https://doi.org/10.4028/www.scientific.net/AMR.93-94.370

Payae Y. and Lopattananon N. (2009). Adhesion of pineapple-leaf fiber to epoxy matrix: The role of surface treatments. Songklanakarin Journal of Science and Technology, 31(2), 189-194.
Cited: 14

Boonsong K., Seadan M. and Lopattananon N. (2008). Compatibilization of natural rubber (NR) and chlorosulfonated polyethylene (CSM) blends with zinc salts of sulfonated natural rubber. Songklanakarin Journal of Science and Technology, 30(4), 491-499.
Cited: 9

Lopattananon N., Payae Y. and Seadan M. (2008). Influence of fiber modification on interfacial adhesion and mechanical properties of pineapple leaf fiber-epoxy composites. Journal of Applied Polymer Science, 110(1), 433-443.
Cited: 51 doi: https://doi.org/10.1002/app.28496

Lopattananon N., Boonsong K. and Seadan M. (2007). Effects of zinc salts of sulfonated natural rubber on mechanical properties, morphology and compatibility of natural rubber/chlorosulfonated polyethylene blends. International Polymer Processing, 22(4), 359-367.
Cited: 0 doi: https://doi.org/10.3139/217.2011

PAGE-7

Lopattananon N., Kraibut A., Sangjan R. and Seadan M. (2007). Ionic elastomer blends of zinc salts of maleated natural rubber and carboxylated nitrile rubber: Effect of grafted maleic anhydride. Journal of Applied Polymer Science, 105(3), 1444-1455.
Cited: 9 doi: https://doi.org/10.1002/app.26312

Lopattananon N., Panawarangkul K., Sahakaro K. and Ellis B. (2006). Performance of pineapple leaf fiber-natural rubber composites: The effect of fiber surface treatments. Journal of Applied Polymer Science, 102(2), 1974-1984.
Cited: 147 doi: https://doi.org/10.1002/app.24584

Lopattananon N., Hayes S. and Jones F. (2002). Stress transfer function for interface assessment in composites with plasma copolymer functionalized carbon fibres. Journal of Adhesion, 78(4), 313-350.
Cited: 20 doi: https://doi.org/10.1080/00218460210935

Syme V., Lamb D., Lopattananon N., Ellis B. and Jones F. (2001). The effect of powder/liquid mixing ratio on the stiffness and impact strength of autopolymerising dental acrylic resins.. The European journal of prosthodontics and restorative dentistry, 9(2), 87-91.
Cited: 3

Lopattananon N., Kettle A., Tripathi D., Beck A., Duval E., France R., Short R. and Jones F. (1999). Interface molecular engineering of carbon-fiber composites. Composites Part A: Applied Science and Manufacturing, 30(1), 49-57.
Cited: 53 doi: https://doi.org/10.1016/S1359-835X(98)00109-2

Tripathi D., Lopattananon N. and Jones F. (1998). A technological solution to the testing and data reduction of single fibre fragmentation tests. Composites Part A: Applied Science and Manufacturing, 29(9-10), 1099-1109.
Cited: 34 doi: https://doi.org/10.1016/S1359-835X(98)00076-1

ณฐินี โล่ห์พัฒนานนท์

NATINEE LOPATTANANON

รองศาสตราจารย์ (Associate Professor)

About

🎓 Education

Ph.D.Polymer Engineering

🎖 Expertise

🏆 Awards & Honors

asdasd

ผลงาน: asdas

🎭 Important Roles

asd

Overview

Papers (Scopus/ISI/TCI)

📊 Research Metrics

📝 Patents

📚 Books

🔬 Research Projects

WoS/ISI Papers

Scopus Papers