SAT-DIC: Academic Profile

อิทธิพลของสารวัลคาไนซ์ชนิดไดนามิกส์โควาเลนท์ต่อสมบัติของยางธรรมชาติอิพอกไซด์วัลคาไนซ์
Influence of New Synthesized Dynamic Covalent Crosslinker on Properties of Epoxidized Natural Rubber Vulcanizates
บทบาท: หัวหน้าโครงการ, 2567

การเพิ่มมูลค่าเศษเหลือจากอุตสาหกรรมยางในการพัฒนาผลิตภัณฑ์ยางเพื่อตอบโจทย์เศรษฐกิจ แบบองค์รวม
Value Addition of Industrial Rubber Wastes in Development of Rubber Products for Bio-Circular-Green Economy
บทบาท: หัวหน้าโครงการ, 2566

เศษเหลืออุตสาหกรรมโฟมยางเพื่อพัฒนาปะเก็นยางธรรมชาติเทอร์โมพลาสติกทน น้ำมันและความร้อน (Rubber Foam Industry Waste for Development of Oil and Heat Resistant Thermoplastic Natural Rubber based Gasket)

บทบาท: หัวหน้าโครงการย่อย, 2566

การพัฒนายางธรรมชาติวัลคาไนซ์ที่สามารถผันกลับได้ด้วยความร้อนโดยใช้ปฏิกิริยาดีลส์แอลเดอร์
Development of Thermo-reversibly Vulcanized Natural Rubber through Diels-Alder Reaction
บทบาท: ผู้ร่วมวิจัย, 2566

แนวทางใหม่สู่การพัฒนาที่ยั่งยืนของโครงข่ายยางธรรมชาติ สารเติมแต่งและการใช้ประโยชน์จากเศษเหลือ
New approaches toward sustainable development of natural rubber networks, additives and waste utilization
บทบาท: ผู้ร่วมวิจัย, 2566

PAGE-2

การวัลคาไนซ์ยางธรรมชาติดัดแปรอาศัยอันตรกิริยาระหว่างประจุ
Crosslinking of modified natural rubber by introducing ionic interaction
บทบาท: ผู้ร่วมวิจัย, 2566

การพัฒนาเทอร์โมพลาสติกวัลคาไนซ์สมรรถนะสูงและนำไฟฟ้าจากยางธรรมชาติชนิดดัดแปรเบลนด์กับฟลูออโรพอลิเมอร์
Development of High-performance and Conductive Thermoplastic Vulcanizate based on Modified Natural Rubber and Fluoropolymers blends
บทบาท: ผู้ร่วมวิจัย, 2566

4. อิทธิพลของพอลิโรทาแซนกราฟต์ด้วยเมอแคปโตไซเลนต่อสมบัติของยางธรรมชาติอิพอกไซด์วัลคาไนซ์
4. Influence of Mercaptosilane- grafted Polyrotaxane on Vulcanized Epoxidized Natural Rubber Properties
บทบาท: หัวหน้าโครงการย่อย, 2566

การพัฒนาเทอร์โมพลาสติกวัลคาไนซ์สมรรถนะสูงและนำไฟฟ้าจากยางธรรมชาติชนิดดัดแปรเบลนด์กับฟลูออโรพอลิเมอร์
Development of High-performance and Conductive Thermoplastic Vulcanizate based on Modified Natural Rubber and Fluoropolymers blends
บทบาท: ผู้ร่วมวิจัย, 2565

เศษเหลืออุตสาหกรรมโฟมยางเพื่อพัฒนาปะเก็นยางธรรมชาติเทอร์โมพลาสติกทนน้ำมันและความร้อน
Rubber Foam Industry Waste for Development of Oil and Heat Resistant Thermoplastic Natural Rubber based Gasket
บทบาท: หัวหน้าโครงการย่อย, 2565

PAGE-3

การพัฒนายางธรรมชาติเบลนด์ร่วมกับพอลิแลคติกแอซิดและสารตัวเติมอนุภาคนาโนเพื่ออุตสาหกรรมยางสีเขียวในอนาคต
Development of Natural Rubber- Polylactic acid-Nanofillers Blend for Future Green Rubber Industry
บทบาท: หัวหน้าโครงการ, 2565

การพัฒนาวัสดุยางดูดซับน้ำมันจากเศษยางในกระบวนการผลิตยางพารา
Development of Oil Absorbent Materials from Scraps of Raw Rubber Production
บทบาท: ผู้ร่วมวิจัย, 2565

การพัฒนายางธรรมชาตินำไฟฟ้าจากยางรีเคลมผสมถ่านชีวมวลจากกระบวนการพลาสมาแก๊สซิฟิเคชั่นเศษเหลือปาล์ม
Development of conductive Natural Rubber from Reclaim Rubber and iochar based on Plasma Gasification of Palm Waste
บทบาท: ผู้ร่วมวิจัย, 2565

การดีวัลคาไนซ์เศษยางไนไตรล์จากอุตสาหกรรมถุงมือยางและการใช้ประโยชน์ในยางธรรมชาติลดไฟฟ้าสถิตย์
De-vulcanization of Nitrile Rubber Waste from Rubber Gloves Industry and Its Application in Antistatic Natural Rubber
บทบาท: ผู้ร่วมวิจัย, 2565

การเพิ่มมูลค่าเศษเหลือจากอุตสาหกรรมยางในการพัฒนาผลิตภัณฑ์ยางเพื่อตอบโจทย์เศรษฐกิจแบบองค์รวม
Value Addition of Industrial Rubber Wastes in Development of Rubber Products for Bio-Circular-Green Economy
บทบาท: ผู้อำนวยการแผนงานวิจัย, 2565

PAGE-4

การพัฒนาของเล่นเสริมพัฒนาการจากยางพาราต่อการลดพฤติกรรมก้าวร้าวและประสิทธิภาพการผลิตของลูกสุกรหลังหย่านม
การพัฒนาของเล่นเสริมพัฒนาการจากยางพาราต่อการลดพฤติกรรมก้าวร้าวและประสิทธิภาพการผลิตของลูกสุกรหลังหย่านม
บทบาท: ผู้ร่วมวิจัย, 2565

การออกสูตรยางคอมพาวนด์และสมบัติพื้นฐานของยางปูพื้นต่างสัมผัสที่ใช้สารตัวเติมซิลิกา
Rubber Compound Formulations and Basic Properties of Rubber Tactiles Using Silica Filler
บทบาท: หัวหน้าโครงการ, 2562

ดินปั้นบำบัดจากยางธรรมชาติ
Natural Rubber based Therapeutic Putty
บทบาท: หัวหน้าโครงการ, 2561

การประยุกต์ใช้คาร์ดานอลในการปรับปรุงสมบัติของยางธรรมชาติคอมโพสิทที่เสริมแรงด้วยสารตัวเติมเคลย์
Application of Cardanol for Property Improvement of Natural Rubber Composites Reinforced with Clay Filler
บทบาท: หัวหน้าโครงการ, 2560

สารยึดติดจากยางธรรมชาติหลอมด้วยความร้อนชนิดความหนืดต่ำ
Hot Melt Natural Rubber Adhesive with Low Viscosity
บทบาท: หัวหน้าโครงการ, 2560

PAGE-5

การเตรียมเทอร์โมพลาสติกอิลาสโตเมอร์ชนิดนำไฟฟ้าได้จากการเบลนด์พอลิไวนิลลิดีนฟลูออไรด์กับยางธรรมชาติกราฟต์ด้วยพอลิเมทิลเมทาคริเลทที่เติมท่อนาโนคาร์บอน
Preparation of Electrically Conductive Thermoplastic Elastomer based on Poly(vinylidene fluoride)/Natural Rubber-grafted-poly(methyl methacrylate) filled with Carbon Nanotube
บทบาท: ผู้ร่วมวิจัย, 2559

เทอร์โมพลาสติกวัลคาไนซ์เพื่อสิ่งแวดล้อมจากการผสมยางธรรมชาติกับพอลิพรอพิลีนสำหรับการใช้งานเฉพาะด้าน
“Green” TPVs based on Natural Rubber/Polypropylene Blends for Specific Applications
บทบาท: ผู้ร่วมวิจัย, 2559

เทอร์โมพลาสติกวัลคาไนซ์จากการเบลนด์ยางธรรมชาติกราฟต์ด้วยพอลิไดอะซิโตนอะคริลาไมด์กับพอลิเอไมด์-12
Thermoplastic Vulcanizates based on Natural Rubber Grafted with Poly(diacetone-acrylamide)/Polyamide-12 Blends
บทบาท: ผู้ร่วมวิจัย, 2559

การพัฒนายางธรรมชาติเทอร์โมพลาสติกเรืองแสง
Development of Photoluminescent Thermoplastic Natural Rubber
บทบาท: หัวหน้าโครงการย่อย, 2559

การอบรมด้านเทคโนโลยีน้ำยางพารา การแปรรูป และการลดต้นทุน
-
บทบาท: หัวหน้าโครงการ, 2559

PAGE-6

เทอร์โมพลาสติกอิลาสโตเมอร์จากยางรีไซเคิลจากเศษถุงมือยางธรรมชาติกราฟต์มาลิอิกแอนไฮไดร์ดผสมกับพอลิพรอพิลีน
Thermoplastic Elastomer based on Recycled Rubber from Waste of Natural Rubber Gloves Blended with Polypropylene
บทบาท: ผู้ร่วมวิจัย, 2559

การพัฒนาวัสดุที่มีค่าคงที่ไดอิเล็กตริกสูงจากยางธรรมชาตินาโนคอมโพสิทเพื่อประยุกต์ใช้ในการเก็บพลังงานไฟฟ้า
Development of High Dielectric Constant Material from Natural Rubber Nanocomposites for Electrical Energy Storage Application
บทบาท: ผู้ร่วมวิจัย, 2559

กาวสำหรับติดประสานไม้กับไม้และยางกับโลหะจากกราฟต์โคพอลิเมอร์ของยางธรรมชาติกับพอลิอะซิโตอะซิทอกซีเอทธิล เมทาคริเลท
Adhesives for Bonding Wood-to-Wood and Rubber-to-Metal based on Graft Copolymers of Natural Rubber and Poly (acetoacetoxyethyl methacrylate)
บทบาท: ผู้ร่วมวิจัย, 2558

อิทธิพลของระบบวัลคาไนเซชันแบบกำมะถันต่อสมบัติของยางธรรมชาติเบลนด์ยางรีเคลมจากเศษยางล้อ
Effect of Sulfur Vulcanization System on Properties of Natural Rubber/Ground Tire Reclaimed Rubber Blends
บทบาท: หัวหน้าโครงการ, 2558

พื้นระแนงเทียมจากยางธรรมชาติสำหรับโรงเรือนแพะ
Artificial Slatted Floor Based on Natural Rubber for Goat Shelter
บทบาท: หัวหน้าโครงการ, 2557

PAGE-7

การใช้ยางรีเคลมเป็นองค์ประกอบเบลนด์ในยางธรรมชาติ/พอลิโพรไพลีนเทอร์โมพลาสติกวัลคาไนซ์
Using of Reclaimed Rubber as Blend Component in Natural Rubber/Polypropylene Thermoplastic Vulcanizates
บทบาท: หัวหน้าโครงการ, 2557

ผลของสารตัวเติมฟอสฟอร์และไททาเนียมไดออกไซด์ต่อสมบัติของยางธรรมชาติเทอร์โมพลาสติก
Effect of Phosphor and Titanium Dioxide Fillers on Properties of Thermoplastic Natural Rubber
บทบาท: หัวหน้าโครงการ, 2557

ผลของยางรีเคลมต่อสมบัติของเทอร์โมพลาสติกวัลคาไนซ์จากการเบลนด์ยางธรรมชาติกับพอลิโพรไพลีน
Effect of Reclaimed Rubber on Properties of Natural Rubber/Polypropylene Thermoplastic Vulcanizates
บทบาท: หัวหน้าโครงการ, 2557

อิทธิพลของน้ำมันช่วยแปรรูปที่ดัดแปรจากน้ำมันพืชต่อสมบัติการไหล สมบัติเชิงกล สมบัติพลวัติเชิงกล และสมบัติเชิงความร้อนของเทอร์โมพาสติกวัลคาไนซ์จากยางธรรมชาติอิพอกไซด์เบลนด์กับพอลิโพรไพลีน และยางธรรมชาติอิพอกไซด์เบลนด์กับเอทิลีนไวนิลอะซิเตท
Influence of processing oil based on modified vegetable oils on rheological, mechanical, dynamic and thermal properties of thermoplastic vulcanizates from epoidized natural rubber/polypropylene blends and epoxidized natural rubber/ethylene vinyl acetate blends
บทบาท: หัวหน้าโครงการย่อย, 2555

การประยุกต์ใช้ยางธรรมชาติในแผ่นพิมพ์พอลิเมอร์ระบบเฟลกโซกราฟี
Application of Natural Rubber in Flexographic Printing Plate
บทบาท: หัวหน้าโครงการ, 2555

PAGE-8

การเตรียมฟิล์มพอลิยูริเทนที่มียางธรรมชาติเป็นองค์ประกอบ

บทบาท: หัวหน้าโครงการ, 2554

ประสิทธิภาพเครื่องคอลลอยด์มิลล์ต่อขนาดอนุภาคและการกระจายตัวของซิลิกาใน ยางธรรมชาติ
Efficiency of the colloid mill on particle size and distribution of silica filled natural rubber
บทบาท: หัวหน้าโครงการ, 2554

ทอร์โมพลาสติกยางธรรมชาตชนิดใหม่จากไนลอนและพอลิเอสเทอร์
?Novel thermoplastic natural rubber based on nylon and polyester
บทบาท: ผู้ร่วมวิจัย, 2554

การเตรียมและสมบัติของน้ำมันแปรรูปยางจากเอริลเอสเทอร์ของกรดไขมันจากน้ำมันพืช (น้ำมันปาล์ม น้ำมันถั่วเหลือง และน้ำมันมะพร้าว)
Preparation and Characterization of Rubber Processing Oil Based on Fatty Acid Aryl Ester of Vegetable Oils (Palm, Soybean and Coconut oils)
บทบาท: ผู้ร่วมวิจัย, 2553

สารเคลือบพอลิยูริเทนเชื่อมขวางด้วยความร้อนและแสงอัลตร้าไวโอเลตที่มียางธรรมชาติเป็นองค์ประกอบ
Heat and Photocurable Natural Rubber Based Polyurethane Coating
บทบาท: หัวหน้าโครงการ, 2553

PAGE-9

อิทธิพลของระบบการวัลคาไนเซชันและสารป้องกันการเสื่อมสภาพต่อสมบัติต้านความทนทานต่อความร้อนของเทอร์โมพลาสติกวัลคาไนซ์จากการเบลนด์ยางธรรมชาติกับพอลิโพรไพลีน
High Heat Resistant of Thermoplastic vulcanizates based on Natural Rubber and polypropylene Blends: Effect of vulacanization Systems and Antidegradants
บทบาท: หัวหน้าโครงการ, 2552

อิทธิพลของระบบการวัลคาไนเซชันและสารป้องการการเสื่อมสภาพต่อสมบัติด้านความทนทานต่อความร้อนของเทอร์โมพลาสติกวัลคาไนซ์จากการเบลนด์ยางธรรมชาติกับพอลิโพรไพลิน
High Heat Resistant of Thermoplastic vulcanizatesbased on Natural Rubber and Polypropylene Blends :EFfect of Vulcanization Systems and Antidegradant
บทบาท: หัวหน้าโครงการ, 2552

ยางธรรมชาติทนน้ำมัน ความร้อน การติดไฟจากยางธรรมชาติอิพอกไซด์คลอริเนตเตท/พอลิโพรพิลีน
Oil and Heat Resistance, Flame Retadant Natural Rubber from Chlorinated Epoxidited Natural Rubber Polypropylene Blends
บทบาท: หัวหน้าโครงการ, 2552

WoS/ISI Papers

55

ISI papers

📘

PAGE-1

Salaeh, S, Thitithammawong, A and Banerjee, SS. (2024). A new strategy applying ternary blends of modified natural rubber with fluoroplastic and fluorocarbon elastomer for high-performance thermoplastic vulcanizate. POLYMER TESTING, 140
Cited: 2 doi: https://doi.org/10.1016/j.polymertesting.2024.108594

Ninjan, R, Thongnuanchan, B, Lopattananon, N, Salaeh, S and Thitithammawong, A. (2024). Thermally assisted healable film based on modified natural rubber-bearing benzyl chloride functionality. EXPRESS POLYMER LETTERS, 18(7), 742-759.
Cited: 1 doi: https://doi.org/10.3144/expresspolymlett.2024.55

Sripornsawat, B, Georgopoulou, A, Tulaphol, S, Thitithammawong, A, Johns, J, Nakaramontri, Y and Clemens, F. (2023). Use of modified deep eutectic solvent as an additional chemical in a flexible conductive natural rubber sensor for motion analysis. EXPRESS POLYMER LETTERS, 17(1), 69-89.
Cited: 10 doi: https://doi.org/10.3144/expresspolymlett.2023.6

Thitithammawong, A, Saiwari, S, Salaeh, S and Hayeemasae, N. (2022). Potent Application of Scrap from the Modified Natural Rubber Production as Oil Absorbent. POLYMERS, 14(23)
Cited: 3 doi: https://doi.org/10.3390/polym14235066

Saiwari, S, Nobnop, S, Bueraheng, Y, Thitithammawong, A, Hayeemasae, N and Salaeh, S. (2022). Segregated MWCNT Structure Formation in Conductive Rubber Nanocomposites by Circular Recycling of Rubber Waste. ACS APPLIED POLYMER MATERIALS, 4(10), 7463-7475.
Cited: 2 doi: https://doi.org/10.1021/acsapm.2c01203

Sripornsawat, B, Thitithammawong, A, Tulaphol, S, Johns, J and Nakaramontri, Y. (2021). Positive Synergistic Effects on Vulcanization, Mechanical and Electrical Properties of Using Deep Eutectic Solvent in Natural Rubber Vulcanizates. POLYMER TESTING, 96
Cited: 22 doi: https://doi.org/10.1016/j.polymertesting.2021.107071

Ninjan, R, Thongnuanchan, B, Lopattananon, N, Thitithammawong, A and Nakason, C. (2021). Rubber-to-steel adhesives based on natural rubber grafted with poly(acetoacetoxyethyl methacrylate). JOURNAL OF POLYMER ENGINEERING, 41(3), 192-201.
Cited: 3 doi: https://doi.org/10.1515/polyeng-2020-0156

Salaeh, S, Thitithammawong, A and Salae, A. (2020). Highly enhanced electrical and mechanical properties of methyl methacrylate modified natural rubber filled with multiwalled carbon nanotubes. POLYMER TESTING, 85
Cited: 26 doi: https://doi.org/10.1016/j.polymertesting.2020.106417

Thitithammawong, A, Chuycherd, N, Leekharee, S and Saiwari, S. (2020). Mechanical, morphological, and luminescent properties of strontium phosphorescent filler-filled NR/PP/PEC blends as affected by processing design. JOURNAL OF ELASTOMERS AND PLASTICS, 52(5), 383-396.
Cited: 0 doi: https://doi.org/10.1177/0095244319854149

Ninjan, R, Thongnuanchan, B, Lopattananon, N, Thitithammawong, A and Nakason, C. (2019). Ambient curable latex films and adhesives based on natural rubber bearing Acetoacetoxy functionality. POLYMERS FOR ADVANCED TECHNOLOGIES, 30(3), 598-607.
Cited: 7 doi: https://doi.org/10.1002/pat.4496

PAGE-2

Thitithammawong, A, Uthaipan, N, Junhasavasdikul, B, Nakason, C and Kalkornsurapranee, E. (2019). Curing characteristics and kinetics of EPDM and EOC compounds in co-vulcanization as blend. JOURNAL OF APPLIED POLYMER SCIENCE, 136(23)
Cited: 5 doi: https://doi.org/10.1002/app.47613

Thongnuanchan, B, Nantayos, W, Lopattananon, N, Rattanapan, S, Thitithammawong, A and Nakason, C. (2019). New Thermoplastic Vulcanizate Based on Acetoacetoxy Functionalized Natural Rubber/Polyamide12 Blend Filled with Carbon Black. JOURNAL OF POLYMERS AND THE ENVIRONMENT, 27(8), 1807-1820.
Cited: 8 doi: https://doi.org/10.1007/s10924-019-01475-2

Saiwari, S, Yusoh, B and Thitithammawong, A. (2019). Recycled Rubber from Waste of Natural Rubber Gloves Blending with Polypropylene for Preparation of Thermoplastic Vulcanizates Compatibilized by Maleic Anhydride. JOURNAL OF POLYMERS AND THE ENVIRONMENT, 27(5), 1141-1149.
Cited: 9 doi: https://doi.org/10.1007/s10924-019-01413-2

Thitithammawong, A, Hayichelaeh, C, Nakason, W and Jehvoh, N. (2019). The use of reclaimed rubber from waste tires for production of dynamically cured natural rubber/reclaimed rubber/polypropylene blends: effect of reclaimed rubber loading. JOURNAL OF METALS MATERIALS AND MINERALS, 29(2), 98-104.
Cited: 1 doi: https://doi.org/10.14456/jmmm.2019.24

Pongdong, W, Kummerl?we, C, Vennemann, N, Thitithammawong, A and Nakason, C. (2018). A Comparative Investigation of Rice Husk Ash and Siliceous Earth as Reinforcing Fillers in Dynamically Cured Blends of Epoxidized Natural Rubber (ENR) and Thermoplastic Polyurethane (TPU). JOURNAL OF POLYMERS AND THE ENVIRONMENT, 26(3), 1145-1159.
Cited: 15 doi: https://doi.org/10.1007/s10924-017-1022-5

Pongdong, W, Kummerl?we, C, Vennemann, N, Thitithammawong, A and Nakason, C. (2018). A Comparative Study of Rice Husk Ash and Siliceous Earth as Reinforcing Fillers in Epoxidized Natural Rubber Composites. POLYMER COMPOSITES, 39(2), 414-426.
Cited: 34 doi: https://doi.org/10.1002/pc.23951

Salaeh, S, Banda, T, Pongdong, V, Wiessner, S, Das, A and Thitithammawong, A. (2018). Compatibilization of poly(vinylidene fluoride)/natural rubber blend by poly (methyl methacrylate) modified natural rubber. EUROPEAN POLYMER JOURNAL, 107, 132-142.
Cited: 24 doi: https://doi.org/10.1016/j.eurpolymj.2018.08.007

Sookyung, U, Thitithammawong, A, Nakason, C, Pakhathirathien, C and Thaijaroen, W. (2018). Effects of Cashew Nut Shell Liquid and Its Decarboxylated Form on the Properties of Natural Rubber. JOURNAL OF POLYMERS AND THE ENVIRONMENT, 26(8), 3451-3457.
Cited: 8 doi: https://doi.org/10.1007/s10924-018-1227-2

Kalkornsurapranee, E, Yung-Aoon, W, Thongnuanchan, B, Thitithammawong, A, Nakason, C and Johns, J. (2018). Influence of grafting content on the properties of cured natural rubber grafted with PMMAs using glutaraldehyde as a cross-linking agent. ADVANCES IN POLYMER TECHNOLOGY, 37(5), 1478-1485.
Cited: 22 doi: https://doi.org/10.1002/adv.21806

Pongdong, W, Kummerl?we, C, Vennemann, N, Thitithammawong, A and Nakason, C. (2018). Thermodynamically and kinetically favored locations of rice husk ash particles in the phase structure, and the properties of epoxidized natural rubber/thermoplastic polyurethane blends. JOURNAL OF APPLIED POLYMER SCIENCE, 135(38)
Cited: 3 doi: https://doi.org/10.1002/app.46681

PAGE-3

Boontawee, H, Nakason, C, Kaesaman, A, Thitithammawong, A and Chewchanwuttiwong, S. (2017). Benzyl Esters of Vegetable Oils as Processing Oil in Carbon Black-Filled SBR Compounding: Chemical Modification, Characterization, and Performance. ADVANCES IN POLYMER TECHNOLOGY, 36(3)
Cited: 16 doi: https://doi.org/10.1002/adv.21610

Uthaipan, N, Jarnthong, M, Peng, Z, Junhasavasdikul, B, Nakason, C and Thitithammawong, A. (2017). Effects of crosslinked elastomer particles on heterogeneous nucleation of isotactic PP in dynamically vulcanized EPDM/PP and EOC/PP blends. JOURNAL OF POLYMER RESEARCH, 24(8)
Cited: 11 doi: https://doi.org/10.1007/s10965-017-1279-3

Thongnuanchan, B, Rattanapan, S, Persalea, K, Thitithammawong, A, Pichaiyut, S and Nakason, C. (2017). Improving properties of natural rubber/polyamide 12 blends through grafting of diacetone acrylamide functional group. POLYMERS FOR ADVANCED TECHNOLOGIES, 28(9), 1148-1155.
Cited: 7 doi: https://doi.org/10.1002/pat.4007

Uthaipan, N, Junhasavasdikul, B, Vennemann, N, Nakason, C and Thitithammawong, A. (2017). Investigation of surface properties and elastomeric behaviors of EPDM/EOC/PP thermoplastic vulcanizates with different octene contents. JOURNAL OF APPLIED POLYMER SCIENCE, 134(21)
Cited: 18 doi: https://doi.org/10.1002/app.44857

Uthaipan, N, Jarnthong, M, Peng, Z, Junhasavasdikul, B, Nakason, C and Thitithammawong, A. (2016). Micro-scale morphologies of EPDM/EOC/PP ternary blends: Relating experiments to predictive theories of dispersion in melt mixing. MATERIALS & DESIGN, 100, 19-29.
Cited: 30 doi: https://doi.org/10.1016/j.matdes.2016.03.099

Pongdong, W, Kummerl?we, C, Vennemann, N, Thitithammawong, A and Nakason, C. (2016). Property correlations for dynamically cured rice husk ash filled epoxidized natural rubber/thermoplastic polyurethane blends: Influences of RHA loading. POLYMER TESTING, 53, 245-256.
Cited: 26 doi: https://doi.org/10.1016/j.polymertesting.2016.05.026

Uthaipan, N, Jarnthong, M, Peng, Z, Junhasavasdikul, B, Nakason, C and Thitithammawong, A. (2015). Effects of cooling rates on crystallization behavior and melting characteristics of isotactic polypropylene as neat and in the TPVs EPDM/PP and EOC/PP. POLYMER TESTING, 44, 101-111.
Cited: 45 doi: https://doi.org/10.1016/j.polymertesting.2015.04.002

Thitithammawong, A, Nakason, C and Hayichelaeh, C. (2015). Influence of Oxirane Ring and Phenylenediamine Structures in Modified Palm Processing Oils on Properties of ENR/PP TPVs. MACROMOLECULAR SYMPOSIA, 354(1), 21-27.
Cited: 6 doi: https://doi.org/10.1002/masy.201400070

Uthaipan, N, Junhasavasdikul, B, Nakason, C and Thitithammawong, A. (2015). Prediction models for the key mechanical properties of EPDM/PP blends as affected by processing parameters and their correlation with stress relaxation and phase morphologies. POLYMERS FOR ADVANCED TECHNOLOGIES, 26(8), 970-977.
Cited: 13 doi: https://doi.org/10.1002/pat.3511

Thitithammawong, A, Rungvichaniwat, A and Srangkum, S. (2015). Properties of Dual Cured Polyurethane Film Coatings Based on Natural Rubber. MACROMOLECULAR SYMPOSIA, 354(1), 354-360.
Cited: 3 doi: https://doi.org/10.1002/masy.201400100

PAGE-4

Thitithammawong, A, Nakason, C and Kasoe, R. (2015). The Effects of Chlorination and Epoxidation on Mooney Viscosity, Curing Characteristics and Vulcanisate Properties of Silica Filled Chlorinated Epoxidised Natural Rubber. JOURNAL OF RUBBER RESEARCH, 18(1), 1-16.
Cited: 1

Thitithammawong, A, Nakason, C and Warawat, T. (2014). Application of Natural Rubbers as Blend Component in Formulation of Flexographic Printing Photopolymer. Part I: Effect of Natural Rubber Types, Blend Ratios as well as Types and Quantities of Acrylate Monomer. JOURNAL OF RUBBER RESEARCH, 17(3), 143-160.
Cited: 0

Uthaipan, N, Junhasavasdikul, B, Nakason, C and Thitithammawong, A. (2014). Assessment of Mixing Efficiency of Intermeshing Rotor Mixers on Morphological and Mechanical Properties and Crosslink Density of Dynamically Vulcanized EPDM/PP Blends. ADVANCES IN RUBBER, 844, 122-+.
Cited: 3 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.122

Kaewkabpet, D, Nakason, C, Kaesaman, A and Thitithammawong, A. (2014). Changes in Mixing Torque, Mechanical and Dynamic Rheological Properties of Epoxidized Natural Rubber and Copolyester Blends as Affected by Epoxidized Natural Rubber Contents. ADVANCES IN RUBBER, 844, 69-72.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.69

Hayichelaeh, C, Wangwon, W, Nakason, C and Thitithammawong, A. (2014). Effect of N-Phenyl-p-Phenylenediamine Modified Vegetable Oils on Properties of ENR/PP Thermoplastic Vulcanizates: A Comparative Study. ADVANCES IN RUBBER, 844, 162-165.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.162

Chanpon, K, Thitithammawong, A, Nakason, C and Kaesaman, A. (2014). Effect of Unmodified and Modified Epoxidized Soyabean Oils on Properties of Black-NBR Compounds and Black-NBR Vulcanizates. ADVANCES IN RUBBER, 844, 49-52.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.49

Boontawee, H, Nakason, C, Kaesaman, A, Thitithammawong, A and Chewchanwuttiwong, S. (2014). Influence of benzyl ester oil on processability of silica filled NR compound. ADVANCES IN RUBBER, 844, 221-+.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.221

Romin, R, Nakason, C and Thitithammawong, A. (2014). Influence of Curing Systems on Mechanical, Dynamic, and Morphological Properties of Dynamically Cured Epoxidized Natural Rubber/Copolyamide Blends. ADVANCES IN RUBBER, 844, 81-84.
Cited: 4 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.81

Leadsang, S, Thitithammawong, A, Nakason, C and Kaesaman, A. (2014). Influence of N-phenyl-p-phenylenediamine Modified Epoxidized Palm Oil on Properties of Carbon Black Filled Natural Rubber Compound and Vulcanizate. ADVANCES IN RUBBER, 844, 239-242.
Cited: 3 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.239

Hayichelaeh, C, Nakason, C and Thitithammawong, A. (2014). Mixing Methods Influencing on Properties of Epoxidized Natural Rubber/Polypropylene Thermoplastic Vulcanizates. ADVANCES IN RUBBER, 844, 109-112.
Cited: 4 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.109

PAGE-5

Thitithammawong, A, Kasoe, R and Nakason, C. (2012). A Comparative Study of the Effect of Cross link Agents and Chemical Modification on Properties of Natural Rubber Vulcanizates. ADVANCED MATERIALS, PTS 1-3, 415-417, 2334-2337.
Cited: 0 doi: https://doi.org/10.4028/www.scientific.net/AMR.415-417.2334

Boontawee, H, Nakason, C, Kaesaman, A, Thitithammawong, A and Chewchanwuttiwong, S. (2012). Application of Benzyl Ester of Modified Vegetable Oils as Rubber Processing Oils. ADVANCED MATERIALS, PTS 1-3, 415-417, 1164-+.
Cited: 10 doi: https://doi.org/10.4028/www.scientific.net/AMR.415-417.1164

Boontawee, H, Nakason, C, Kaesaman, A, Thitithammawong, A and Chewchanwuttiwong, S. (2012). Comparative Properties of Vegetable Oil-Based Benzyl Esters and Vegetable Oils as Processing Oil in Natural Rubber Compounds. ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY, 626, 237-+.
Cited: 5 doi: https://doi.org/10.4028/www.scientific.net/AMR.626.237

Thitithammawong, A, Kaewsare, A and Nakason, C. (2012). Improved Properties of CENR/PP Blends by Using Compatibilizers for Promoting the Interfacial Adhesion between Phases. ADVANCED MATERIALS, PTS 1-3, 415-417, 2248-2251.
Cited: 0 doi: https://doi.org/10.4028/www.scientific.net/AMR.415-417.2248

Thitithammawong, A, Uthaipan, N and Rungvichaniwat, A. (2012). Influence of Zinc Oxide Contents on Mechanical, Rheological and Thermal Properties of Thermoplastic Natural Rubber. ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY, 626, 75-78.
Cited: 1 doi: https://doi.org/10.4028/www.scientific.net/AMR.626.75

Johns, J, Nakason, C, Thitithammawong, A and Klinpituksa, P. (2012). METHOD TO VULCANIZE NATURAL RUBBER FROM MEDIUM AMMONIA LATEX BY USING GLUTARALDEHYDE. RUBBER CHEMISTRY AND TECHNOLOGY, 85(4), 565-575.
Cited: 20 doi: https://doi.org/10.5254/rct.12.88920

Thitithammawong, A, Ruttanasupa, N and Nakason, C. (2012). Preparation and Properties of Chlorinated Epoxidised Natural Rubber Latex and Its Latex-Based Adhesive. JOURNAL OF RUBBER RESEARCH, 15(1), 19-34.
Cited: 8

Thitithammawong, A, Uthaipan, N and Rungvichaniwat, A. (2012). The influence of mixed conventional sulfur/peroxide vulcanization systems on the mechanical and thermal properties of natural rubber/polypropylene blends. JOURNAL OF ELASTOMERS AND PLASTICS, 44(5), 419-432.
Cited: 8 doi: https://doi.org/10.1177/0095244311432781

Romin, R, Nakason, C and Thitithammawong, A. (2012). Thermoplastic Elastomer Based on Epoxidized Natural Rubber/Polyamide-12 and Co-Polyamide-12 Blends.. ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY, 626, 58-61.
Cited: 7 doi: https://doi.org/10.4028/www.scientific.net/AMR.626.58

Thitithammawong, A, Srangkhum, S and Rungvichaniwat, A. (2011). Hydroxytelechelic Natural Rubber from Natural Rubber and Epoxidised Natural Rubber. JOURNAL OF RUBBER RESEARCH, 14(4), 230-240.
Cited: 7

PAGE-6

Thitithammawong, A, Nakason, C, Sahakaro, K and Noordermeer, JWM. (2009). Multifunctional Peroxide as Alternative Crosslink Agents for Dynamically Vulcanized Epoxidized Natural Rubber/Polypropylene Blends. JOURNAL OF APPLIED POLYMER SCIENCE, 111(2), 819-825.
Cited: 14 doi: https://doi.org/10.1002/app.29129

Thitithammawong, A, Noordermeer, JWM, Kaesaman, A and Nakason, C. (2008). Influence of compatibilizers on the rheological, mechanical and morphological properties of epoxidized natural rubber/polypropylene thermoplastic vulcanizates. JOURNAL OF APPLIED POLYMER SCIENCE, 107(4), 2436-2443.
Cited: 30 doi: https://doi.org/10.1002/app.27233

Thitithammawong, A, Nakason, C, Sahakaro, K and Noordermeer, J. (2007). Effect of different types of peroxides on rheological, mechanical, and morphological properties of thermoplastic vulcanizates based on natural rubber/polypropylene blends. POLYMER TESTING, 26(4), 537-546.
Cited: 78 doi: https://doi.org/10.1016/j.polymertesting.2007.02.002

Thitithammawong, A, Nakason, C, Sahakaro, K and Noordermeer, JWM. (2007). NR/PP thermoplastic vulcanizates: Selection of optimal peroxide type and concentration in relation to mixing conditions. JOURNAL OF APPLIED POLYMER SCIENCE, 106(4), 2204-2209.
Cited: 29 doi: https://doi.org/10.1002/app.25935

Thitithammawong, A, Nakason, C, Sabakaro, K and Noordermeer, JWM. (2007). Thermoplastic vulcanizates based on epoxidized natural rubber/polypropylene blends: Selection of optimal peroxide type and concentration in relation to mixing conditions. EUROPEAN POLYMER JOURNAL, 43(9), 4008-4018.
Cited: 35 doi: https://doi.org/10.1016/j.eurpolymj.2007.06.035

Scopus Papers

57

Scopus Papers

📘

PAGE-1

Salaeh S., Thitithammawong A. and Banerjee S. (2024). A new strategy applying ternary blends of modified natural rubber with fluoroplastic and fluorocarbon elastomer for high-performance thermoplastic vulcanizate. Polymer Testing, 140
Cited: 0 doi: https://doi.org/10.1016/j.polymertesting.2024.108594

Ninjan R., Thongnuanchan B., Lopattananon N., Salaeh S. and Thitithammawong A. (2024). Thermally assisted healable film based on modified natural rubber-bearing benzyl chloride functionality. Express Polymer Letters, 18(7), 742-759.
Cited: 0 doi: https://doi.org/10.3144/expresspolymlett.2024.55

Sripornsawat B., Georgopoulou A., Tulaphol S., Thitithammawong A., Johns J., Nakaramontri Y. and Clemens F. (2023). Use of modified deep eutectic solvent as an additional chemical in a flexible conductive natural rubber sensor for motion analysis. Express Polymer Letters, 17(1), 69-89.
Cited: 0 doi: https://doi.org/10.3144/expresspolymlett.2023.6

Thitithammawong A., Saiwari S., Salaeh S. and Hayeemasae N. (2022). Potent Application of Scrap from the Modified Natural Rubber Production as Oil Absorbent. Polymers, 14(23)
Cited: 0 doi: https://doi.org/10.3390/polym14235066

Saiwari S., Nobnop S., Bueraheng Y., Thitithammawong A., Hayeemasae N. and Salaeh S. (2022). Segregated MWCNT Structure Formation in Conductive Rubber Nanocomposites by Circular Recycling of Rubber Waste. ACS Applied Polymer Materials
Cited: 0 doi: https://doi.org/10.1021/acsapm.2c01203

Sripornsawat B., Thitithammawong A., Tulaphol S., Johns J. and Nakaramontri Y. (2021). Positive Synergistic Effects on Vulcanization, Mechanical and Electrical Properties of Using Deep Eutectic Solvent in Natural Rubber Vulcanizates. Polymer Testing, 96
Cited: 0 doi: https://doi.org/10.1016/j.polymertesting.2021.107071

Ninjan R., Thongnuanchan B., Lopattananon N., Thitithammawong A. and Nakason C. (2021). Rubber-to-steel adhesives based on natural rubber grafted with poly(acetoacetoxyethyl methacrylate). Journal of Polymer Engineering, 41(3), 192-201.
Cited: 1 doi: https://doi.org/10.1515/polyeng-2020-0156

Salaeh S., Thitithammawong A. and Salae A. (2020). Highly enhanced electrical and mechanical properties of methyl methacrylate modified natural rubber filled with multiwalled carbon nanotubes. Polymer Testing, 85
Cited: 11 doi: https://doi.org/10.1016/j.polymertesting.2020.106417

Thitithammawong A., Chuycherd N., Leekharee S. and Saiwari S. (2020). Mechanical, morphological, and luminescent properties of strontium phosphorescent filler-filled NR/PP/PEC blends as affected by processing design. Journal of Elastomers and Plastics, 52(5), 383-396.
Cited: 0 doi: https://doi.org/10.1177/0095244319854149

Ninjan R., Thongnuanchan B., Lopattananon N., Thitithammawong A. and Nakason C. (2019). Ambient curable latex films and adhesives based on natural rubber bearing Acetoacetoxy functionality. Polymers for Advanced Technologies, 30(3), 598-607.
Cited: 6 doi: https://doi.org/10.1002/pat.4496

PAGE-2

Thitithammawong A., Uthaipan N., Junhasavasdikul B., Nakason C. and Kalkornsurapranee E. (2019). Curing characteristics and kinetics of EPDM and EOC compounds in co-vulcanization as blend. Journal of Applied Polymer Science, 136(23)
Cited: 3 doi: https://doi.org/10.1002/app.47613

Thongnuanchan B., Nantayos W., Lopattananon N., Rattanapan S., Thitithammawong A. and Nakason C. (2019). New Thermoplastic Vulcanizate Based on Acetoacetoxy Functionalized Natural Rubber/Polyamide12 Blend Filled with Carbon Black. Journal of Polymers and the Environment, 27(8), 1807-1820.
Cited: 3 doi: https://doi.org/10.1007/s10924-019-01475-2

Saiwari S., Yusoh B. and Thitithammawong A. (2019). Recycled Rubber from Waste of Natural Rubber Gloves Blending with Polypropylene for Preparation of Thermoplastic Vulcanizates Compatibilized by Maleic Anhydride. Journal of Polymers and the Environment, 27(5), 1141-1149.
Cited: 5 doi: https://doi.org/10.1007/s10924-019-01413-2

Thitithammawong A., Hayichelaeh C., Nakason W. and Jehvoh N. (2019). The use of reclaimed rubber from waste tires for production of dynamically cured natural rubber/reclaimed rubber/polypropylene blends: Effect of reclaimed rubber loading. Journal of Metals, Materials and Minerals, 29(2), 98-104.
Cited: 1 doi: https://doi.org/10.14456/jmmm.2019.24

Pongdong W., Kummerl?we C., Vennemann N., Thitithammawong A. and Nakason C. (2018). A Comparative Investigation of Rice Husk Ash and Siliceous Earth as Reinforcing Fillers in Dynamically Cured Blends of Epoxidized Natural Rubber (ENR) and Thermoplastic Polyurethane (TPU). Journal of Polymers and the Environment, 26(3), 1145-1159.
Cited: 10 doi: https://doi.org/10.1007/s10924-017-1022-5

Pongdong W., Kummerl?we C., Vennemann N., Thitithammawong A. and Nakason C. (2018). A comparative study of rice husk ash and siliceous earth as reinforcing fillers in epoxidized natural rubber composites. Polymer Composites, 39(2), 414-426.
Cited: 22 doi: https://doi.org/10.1002/pc.23951

Salaeh S., Banda T., Pongdong V., Wiessner S., Das A. and Thitithammawong A. (2018). Compatibilization of poly(vinylidene fluoride)/natural rubber blend by poly(methyl methacrylate) modified natural rubber. European Polymer Journal, 107, 132-142.
Cited: 11 doi: https://doi.org/10.1016/j.eurpolymj.2018.08.007

Sookyung U., Thitithammawong A., Nakason C., Pakhathirathien C. and Thaijaroen W. (2018). Effects of Cashew Nut Shell Liquid and Its Decarboxylated Form on the Properties of Natural Rubber. Journal of Polymers and the Environment, 26(8), 3451-3457.
Cited: 4 doi: https://doi.org/10.1007/s10924-018-1227-2

Kalkornsurapranee E., Yung-Aoon W., Thongnuanchan B., Thitithammawong A., Nakason C. and Johns J. (2018). Influence of grafting content on the properties of cured natural rubber grafted with PMMAs using glutaraldehyde as a cross-linking agent. Advances in Polymer Technology, 37(5), 1478-1485.
Cited: 13 doi: https://doi.org/10.1002/adv.21806

Pongdong W., Kummerl?we C., Vennemann N., Thitithammawong A. and Nakason C. (2018). Thermodynamically and kinetically favored locations of rice husk ash particles in the phase structure, and the properties of epoxidized natural rubber/thermoplastic polyurethane blends. Journal of Applied Polymer Science, 135(38)
Cited: 1 doi: https://doi.org/10.1002/app.46681

PAGE-3

Boontawee H., Nakason C., Kaesaman A., Thitithammawong A. and Chewchanwuttiwong S. (2017). Benzyl Esters of Vegetable Oils as Processing Oil in Carbon Black–Filled SBR Compounding: Chemical Modification, Characterization, and Performance. Advances in Polymer Technology, 36(3), 320-330.
Cited: 9 doi: https://doi.org/10.1002/adv.21610

Uthaipan N., Jarnthong M., Peng Z., Junhasavasdikul B., Nakason C. and Thitithammawong A. (2017). Effects of crosslinked elastomer particles on heterogeneous nucleation of isotactic PP in dynamically vulcanized EPDM/PP and EOC/PP blends. Journal of Polymer Research, 24(8)
Cited: 10 doi: https://doi.org/10.1007/s10965-017-1279-3

Thongnuanchan B., Rattanapan S., Persalea K., Thitithammawong A., Pichaiyut S. and Nakason C. (2017). Improving properties of natural rubber/polyamide 12 blends through grafting of diacetone acrylamide functional group. Polymers for Advanced Technologies, 28(9), 1148-1155.
Cited: 8 doi: https://doi.org/10.1002/pat.4007

Uthaipan N., Junhasavasdikul B., Vennemann N., Nakason C. and Thitithammawong A. (2017). Investigation of surface properties and elastomeric behaviors of EPDM/EOC/PP thermoplastic vulcanizates with different octene contents. Journal of Applied Polymer Science, 134(21)
Cited: 9 doi: https://doi.org/10.1002/app.44857

Uthaipan N., Jarnthong M., Peng Z., Junhasavasdikul B., Nakason C. and Thitithammawong A. (2016). Micro-scale morphologies of EPDM/EOC/PP ternary blends: Relating experiments to predictive theories of dispersion in melt mixing. Materials and Design, 100, 19-29.
Cited: 24 doi: https://doi.org/10.1016/j.matdes.2016.03.099

Pongdong W., Kummerl?we C., Vennemann N., Thitithammawong A. and Nakason C. (2016). Property correlations for dynamically cured rice husk ash filled epoxidized natural rubber/thermoplastic polyurethane blends: Influences of RHA loading. Polymer Testing, 53, 245-256.
Cited: 26 doi: https://doi.org/10.1016/j.polymertesting.2016.05.026

Uthaipan N., Jarnthong M., Peng Z., Junhasavasdikul B., Nakason C. and Thitithammawong A. (2015). Effects of cooling rates on crystallization behavior and melting characteristics of isotactic polypropylene as neat and in the TPVs EPDM/PP and EOC/PP. Polymer Testing, 44, 101-111.
Cited: 30 doi: https://doi.org/10.1016/j.polymertesting.2015.04.002

Thitithammawong A., Nakason C. and Hayichelaeh C. (2015). Influence of oxirane ring and phenylenediamine structures in modified palm processing oils on properties of ENR/PP TPVs. Macromolecular Symposia, 354(1), 21-27.
Cited: 4 doi: https://doi.org/10.1002/masy.201400070

Kalkornsurapranee E., Kaewsakul W., Daengli P., Aree P., Saiwari S. and Thitithammawong A. (2015). Particleboard from para rubber wood bonded with natural rubber-g-methyl (methacrylate). Advances in Environmental Biology, 9(13), 20-24.
Cited: 3

Uthaipan N., Junhasavasdikul B., Nakason C. and Thitithammawong A. (2015). Prediction models for the key mechanical properties of EPDM/PP blends as affected by processing parameters and their correlation with stress relaxation and phase morphologies. Polymers for Advanced Technologies, 26(8), 970-977.
Cited: 12 doi: https://doi.org/10.1002/pat.3511

PAGE-4

Thitithammawong A., Rungvichaniwat A. and Srangkum S. (2015). Properties of dual cured polyurethane film coatings based on natural rubber. Macromolecular Symposia, 354(1), 354-360.
Cited: 3 doi: https://doi.org/10.1002/masy.201400100

Saiwari S., Waesateh K., Lopattananon N., Thititammawong A. and Kaesaman A. (2015). Study on reuse of diphenyl disulfide-devulcanized natural rubber from truck tires. Macromolecular Symposia, 354(1), 155-162.
Cited: 1 doi: https://doi.org/10.1002/masy.201400103

Thitithammawong A., Nakason C. and Kasoe R. (2015). The effects of chlorination and epoxidation on mooney viscosity, curing characteristics and vulcanisate properties of silica filled chlorinated epoxidised natural rubber. Journal of Rubber Research, 18(1), 1-16.
Cited: 0

Thitithammawong A., Nakason C. and Warawat T. (2014). Application of natural rubbers as blend component in formulation of flexographic printing photopolymer. Part I: Effect of natural rubber types, blend ratios as well as types and quantities of acrylate monomer. Journal of Rubber Research, 17(3), 143-160.
Cited: 0

Uthaipan N., Junhasavasdikul B., Nakason C. and Thitithammawong A. (2014). Assessment of mixing efficiency of intermeshing rotor mixers on morphological and mechanical properties and crosslink density of dynamically vulcanized EPDM/PP blends. Advanced Materials Research, 844, 122-126.
Cited: 3 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.122

Kaewkabpet D., Nakason C., Kaesaman A. and Thitithammawong A. (2014). Changes in mixing torque, mechanical and dynamic rheological properties of epoxidized natural rubber and copolyester blends as affected by epoxidized natural rubber contents. Advanced Materials Research, 844, 69-72.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.69

Hayichelaeh C., Wangwon W., Nakason C. and Thitithammawong A. (2014). Effect of N-phenyl-p-phenylenediamine modified vegetable oils on properties of ENR/PP thermoplastic vulcanizates: A comparative study. Advanced Materials Research, 844, 162-165.
Cited: 1 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.162

Chanpon K., Thitithammawong A., Nakason C. and Kaesaman A. (2014). Effect of unmodified and modified epoxidized soyabean oils on properties of black-NBR compounds and black-NBR vulcanizates. Advanced Materials Research, 844, 49-52.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.49

Boontawee H., Nakason C., Kaesaman A., Thitithammawong A. and Chewchanwuttiwong S. (2014). Influence of benzyl ester oil on processability of silica filled NR compound. Advanced Materials Research, 844, 221-224.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.221

Romin R., Nakason C. and Thitithammawong A. (2014). Influence of curing systems on mechanical, dynamic, and morphological properties of dynamically cured epoxidized natural rubber/ copolyamide blends. Advanced Materials Research, 844, 81-84.
Cited: 3 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.81

PAGE-5

Ieadsang S., Thitithammawong A., Nakason C. and Kaesaman A. (2014). Influence of N-phenyl-p-phenylenediamine modified epoxidized palm oil on properties of carbon black filled natural rubber compound and vulcanizate. Advanced Materials Research, 844, 239-242.
Cited: 3 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.239

Hayichelaeh C., Nakason C. and Thitithammawong A. (2014). Mixing methods influencing on properties of epoxidized natural rubber/polypropylene thermoplastic vulcanizates. Advanced Materials Research, 844, 109-112.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.109

Boontawee H., Nakason C., Kaesaman A., Thitithammawong A. and Chewchanwuttiwong S. (2013). Comparative properties of vegetable oil-based benzyl esters and vegetable oils as processing oil in natural rubber compounds. Advanced Materials Research, 626, 237-239.
Cited: 3 doi: https://doi.org/10.4028/www.scientific.net/AMR.626.237

Thitithammawong A., Uthaipan N. and Rungvichaniwat A. (2013). Influence of zinc oxide contents on mechanical, rheological and thermal properties of thermoplastic natural rubber. Advanced Materials Research, 626, 75-78.
Cited: 1 doi: https://doi.org/10.4028/www.scientific.net/AMR.626.75

Romin R., Nakason C. and Thitithammawong A. (2013). Thermoplastic elastomer based on epoxidized natural rubber/polyamide-12 and co-polyamide-12 blends. Advanced Materials Research, 626, 58-61.
Cited: 6 doi: https://doi.org/10.4028/www.scientific.net/AMR.626.58

Thitithammawong A., Kasoe R. and Nakason C. (2012). A comparative study of the effect of crosslink agents and chemical modification on properties of natural rubber vulcanizates. Advanced Materials Research, 415-417, 2334-2337.
Cited: 0 doi: https://doi.org/10.4028/www.scientific.net/AMR.415-417.2334

Boontawee H., Nakason C., Kaesaman A., Thitithammawong A. and Chewchanwuttiwong S. (2012). Application of benzyl ester of modified vegetable oils as rubber processing oils. Advanced Materials Research, 415-417, 1164-1167.
Cited: 9 doi: https://doi.org/10.4028/www.scientific.net/AMR.415-417.1164

Thitithammawong A., Kaewsare A. and Nakason C. (2012). Improved properties of CENR/PP blends by using compatibilizers for promoting the interfacial adhesion between phases. Advanced Materials Research, 415-417, 2248-2251.
Cited: 0 doi: https://doi.org/10.4028/www.scientific.net/AMR.415-417.2248

Johns J., Nakason C., Thitithammawong A. and Klinpituksa P. (2012). Method tovulcanize natural rubber frommedium ammonia latex by using glutaraldehyde. Rubber Chemistry and Technology, 85(4), 565-575.
Cited: 19 doi: https://doi.org/10.5254/rct.12.88920

Thitithammawong A., Ruttanasupa N. and Nakason C. (2012). Preparation and properties of chlorinated epoxidised natural rubber latex and its latex-based adhesive. Journal of Rubber Research, 15(1), 19-34.
Cited: 11

PAGE-6

Thitithammawong A., Uthaipan N. and Rungvichaniwat A. (2012). The effect of the ratios of sulfur to peroxide in mixed vulcanization systems on the properties of dynamic vulcanized natural rubber and polypropylene blends. Songklanakarin Journal of Science and Technology, 34(6), 653-662.
Cited: 10

Thitithammawong A., Uthaipan N. and Rungvichaniwat A. (2012). The influence of mixed conventional sulfur/peroxide vulcanization systems on the mechanical and thermal properties of natural rubber/polypropylene blends. Journal of Elastomers and Plastics, 44(5), 419-432.
Cited: 8 doi: https://doi.org/10.1177/0095244311432781

Thitithammawong A., Nakason C., Sahakaro K. and Noordermeer J. (2009). Multifunctional peroxide as alternative crosslink agents for dynamically vulcanized epoxidized natural rubber/polypropylene blends. Journal of Applied Polymer Science, 111(2), 819-825.
Cited: 11 doi: https://doi.org/10.1002/app.29129

Thitithammawong A., Noordermeer J., Kaesaman A. and Nakason C. (2008). Influence of compatibilizers on the rheological, mechanical, and morphological properties of epoxidized natural rubber/polypropylene thermoplastic vulcanizates. Journal of Applied Polymer Science, 107(4), 2436-2443.
Cited: 27 doi: https://doi.org/10.1002/app.27233

Thitithammawong A., Nakason C., Sahakaro K. and Noordermeer J. (2007). Effect of different types of peroxides on rheological, mechanical, and morphological properties of thermoplastic vulcanizates based on natural rubber/polypropylene blends. Polymer Testing, 26(4), 537-546.
Cited: 69 doi: https://doi.org/10.1016/j.polymertesting.2007.02.002

Thitithammawong A., Nakason C., Sahakaro K. and Noordermeer J. (2007). NR/PP thermoplastic vulcanizates: Selection of optimal peroxide type and concentration in relation to mixing conditions. Journal of Applied Polymer Science, 106(4), 2204-2209.
Cited: 30 doi: https://doi.org/10.1002/app.25935

Thitithammawong A., Nakason C., Sahakaro K. and Noordermeer J. (2007). Thermoplastic vulcanizates based on epoxidized natural rubber/polypropylene blends: Selection of optimal peroxide type and concentration in relation to mixing conditions. European Polymer Journal, 43(9), 4008-4018.
Cited: 34 doi: https://doi.org/10.1016/j.eurpolymj.2007.06.035

อโนมา ธิติธรรมวงศ์

ANOMA THITITHAMMAWONG

รองศาสตราจารย์ (Associate Professor)

About

🎓 Education

Ph.D.เทคโนโลยีพอลิเมอร์

B.Sc.เทคโนโลยีวัสดุภัณฑ์

🎖 Expertise

Overview

Papers (Scopus/ISI/TCI)

📊 Research Metrics

📝 Patents

🔬 Research Projects

WoS/ISI Papers

Scopus Papers