SAT Data and Information Center

ศูนย์ข้อมูลและสารสนเทศเพื่อการบริหารองค์กรสู่ความเป็นเลิศ


ข้อมูลผลงานตีพิมพ์

แสดงข้อมูลผลงานตีพิมพ์ อ้างอิงจากฐาน pubswatch.psu.ac.th (*คลิก GO ทุกครั้งหากกำหนดการค้นใหม่)

กรอง
ช่วงปี
ถึง
Reset
ตาราง ผลงานตีพิมพ์ WoS/ISI ของ อาซีซัน แกสมาน
ลำดับรายละเอียดผลงาน
1Kaesaman, A., Intharapat, P. and Nakason, C. (2025). Flame Retardancy and Properties of Thermoplastic Vulcanizates from Dibutyl Phosphate-Bound Natural Rubber/Ethylene Vinyl Acetate Blends. POLYMER-PLASTICS TECHNOLOGY AND MATERIALS, 64(2), 190-207.
Cited: 0 doi: https://doi.org/10.1080/25740881.2024.2393781
2Kaesaman, A., Chiponbarn, S. and Nakason, C. (2024). Curing, rheological, mechanical, and flame retardant properties of high thermal-resistant dibutyl phosphate-bound natural rubber. EXPRESS POLYMER LETTERS, 18(6), 623-637.
Cited: 0 doi: https://doi.org/10.3144/expresspolymlett.2024.46
3Kaesaman, A., Kaewchuen, S. and Nakason, C. (2024). Implementing eco-friendly creaming agents to address coagulation issues and minimize acid consumption in skim natural rubber latex processing. INDUSTRIAL CROPS AND PRODUCTS, 222
Cited: 1 doi: https://doi.org/10.1016/j.indcrop.2024.119499
4Nakason, C., Chewchanwuttiwong, S., Hathak, C., Petsiri, S. and Kaesaman, A. (2024). Sustainable multi-functional additives: Zinc soaps from vegetable oil and fatty acids in natural rubber compounds. INDUSTRIAL CROPS AND PRODUCTS, 217
Cited: 1 doi: https://doi.org/10.1016/j.indcrop.2024.118827
5Nakason, C., Manleh, C., Lopattananon, N. and Kaesaman, A. (2024). The influence of crosslink characteristics on key properties of dynamically cured NR/PP blends. EXPRESS POLYMER LETTERS, 18(5), 487-503.
Cited: 3 doi: https://doi.org/10.3144/expresspolymlett.2024.36
6Nakason, C., Pichaiyut, S., Vennemann, N. and Kaesaman, A. (2023). D Influence of processing oil on properties of dynamically cured epoxidized natural rubber and thermoplastic polyurethane blends. POLYMER BULLETIN, 80(8), 8627-8650.
Cited: 3 doi: https://doi.org/10.1007/s00289-022-04430-9
7Kaesaman, A., Romin, R. and Nakason, C. (2023). Influence of epoxide content and blend ratios on strength and damping properties of thermoplastic vulcanizates based on epoxidized natural rubber and poly(ether-block-amide) copolymer blends. EXPRESS POLYMER LETTERS, 17(10), 1056-1069.
Cited: 1 doi: https://doi.org/10.3144/expresspolymlett.2023.79
8Kaesaman, A., Lamleah, S. and Nakason, C. (2023). Influence of vulcanization system on curing, mechanical, dynamic and morphological properties of maleated natural rubber and its thermoplastic vulcanizate with thermoplastic copolyester elastomer. EXPRESS POLYMER LETTERS, 17(7), 675-689.
Cited: 6 doi: https://doi.org/10.3144/expresspolymlett.2023.50
9Kaesaman, A., Boontawee, H., Chewchanwuttiwong, S. and Nakasone, C. (2022). Influence of benzyl esters of vegetable oils on curing, mechanical and dynamic properties of silica filled natural rubber and styrene-butadiene rubber compounds. EXPRESS POLYMER LETTERS, 16(5), 540-556.
Cited: 2 doi: https://doi.org/10.3144/expresspolymlett.2022.40
10Sawangpet, K., Walong, A., Thongnuanchan, B., Kaesaman, A., Sakai, T. and Lopattananon, N. (2020). Foaming and Physical Properties, Flame Retardancy, and Combustibility of Polyethylene Octene Foams Modified by Natural Rubber and Expandable Graphite. JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 26(4), 423-433.
Cited: 17 doi: https://doi.org/10.1002/vnl.21757
11Sawangpet, K., Walong, A., Kaesaman, A., Thongnuanchan, B., Sakai, T. and Lopattananon, N. (2020). Structure, physical properties, and flame retardancy of POE/NR/EG blend foams: Effect of crosslinking. MALAYSIAN JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES, 16(1), 44-50.
Cited: 1
12Adair, A., Kaesaman, A. and Klinpituksa, P. (2020). Water-swellable rubber blend from epoxidized natural rubber and superabsorbent polymer composite. PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY, 36(1), 63-77.
Cited: 7 doi: https://doi.org/10.1177/1477760619895025
13Thongnuanchan, B., Ninjan, R., Kaesaman, A. and Nakason, C. (2018). Synthesis of modified Natural Rubber with grafted poly(acetoacetoxyethyl methacrylate-co-methyl methacrylate) and performance of derived adhesives with GTA crosslinker. POLYMER ENGINEERING AND SCIENCE, 58(9), 1610-1618.
Cited: 11 doi: https://doi.org/10.1002/pen.24750
14Boontawee, H., Nakason, C., Kaesaman, A., Thitithammawong, A. and Chewchanwuttiwong, S. (2017). Benzyl Esters of Vegetable Oils as Processing Oil in Carbon Black-Filled SBR Compounding: Chemical Modification, Characterization, and Performance. ADVANCES IN POLYMER TECHNOLOGY, 36(3)
Cited: 16 doi: https://doi.org/10.1002/adv.21610
15Matchawet, S., Kaesaman, A., Vennemann, N., Kumerl?we, C. and Nakason, C. (2017). Effects of imidazolium ionic liquid on cure characteristics, electrical conductivity and other related properties of epoxidized natural rubber vulcanizates. EUROPEAN POLYMER JOURNAL, 87, 344-359.
Cited: 28 doi: https://doi.org/10.1016/j.eurpolymj.2016.12.037
16Matchawet, S., Kaesaman, A., Bomlai, P. and Nakason, C. (2017). Effects of Multi-Walled Carbon Nanotubes and Conductive Carbon Black on Electrical, Dielectric, and Mechanical Properties of Epoxidized Natural Rubber Composites. POLYMER COMPOSITES, 38(6), 1031-1042.
Cited: 20 doi: https://doi.org/10.1002/pc.23666
17Adair, A., Klinpituksa, P. and Kaesaman, A. (2017). Influences of Neutralization of Superabsorbent Hydrogel from Hydroxyethyl Cellulose on Water Swelling Capacities. 4TH INTERNATIONAL CONFERENCE ON RESEARCH, IMPLEMENTATION, AND EDUCATION OF MATHEMATICS AND SCIENCES (ICRIEMS): RESEARCH AND EDUCATION FOR DEVELOPING SCIENTIFIC ATTITUDE IN SCIENCES AND MATHEMATICS, 1868
Cited: 8 doi: https://doi.org/10.1063/1.4995098
18Masa, A., Saito, H., Sakai, T., Kaesaman, A. and Lopattananon, N. (2017). Morphological evolution and mechanical property enhancement of natural rubber/polypropylene blend through compatibilization by nanoclay. JOURNAL OF APPLIED POLYMER SCIENCE, 134(10)
Cited: 19 doi: https://doi.org/10.1002/app.44574
19Matchawet, S., Kaesaman, A., Vennemann, N., Kummerl?we, C. and Nakason, C. (2017). Optimization of Electrical Conductivity, Dielectric Properties, and Stress Relaxation Behavior of Conductive Thermoplastic Vulcanizates Based on ENR/COPA Blends by Adjusting Mixing Method and Ionic Liquid Loading. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 56(13), 3629-3639.
Cited: 13 doi: https://doi.org/10.1021/acs.iecr.7b00252
20Adair, A., Kaesaman, A. and Klinpituksa, P. (2017). Superabsorbent materials derived from hydroxyethyl cellulose and bentonite: Preparation, characterization and swelling capacities. POLYMER TESTING, 64, 321-329.
Cited: 36 doi: https://doi.org/10.1016/j.polymertesting.2017.10.018
21Lopattananon, N., Walong, A., Kaesaman, A. and Seadan, M. (2016). Effect of MAH-g-PP on the Performance of ATH filled NR/PP Thermoplastic Vulcanisates. JOURNAL OF RUBBER RESEARCH, 19(4), 243-260.
Cited: 3
22Matchawet, S., Kaesaman, A., Bomlai, P. and Nakason, C. (2016). Electrical, dielectric, and dynamic mechanical properties of conductive carbon black/epoxidized natural rubber composites. JOURNAL OF COMPOSITE MATERIALS, 50(16), 2191-2202.
Cited: 30 doi: https://doi.org/10.1177/0021998315602941
23Masa, A., Saito, R., Saito, H., Sakai, T., Kaesaman, A. and Lopattananon, N. (2016). Phenolic resin-crosslinked natural rubber/clay nanocomposites: Influence of clay loading and interfacial adhesion on strain-induced crystallization behavior. JOURNAL OF APPLIED POLYMER SCIENCE, 133(12)
Cited: 22 doi: https://doi.org/10.1002/app.43214
24Sasdipan, K., Kaesaman, A., Kummerl?we, C., Vennemann, N. and Nakason, C. (2016). Recyclability of novel dynamically cured copolyester/epoxidized natural rubber blends. JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT, 18(1), 156-167.
Cited: 0 doi: https://doi.org/10.1007/s10163-014-0324-0
25Thongnuanchan, B., Ninjan, R., Kaesaman, A. and Nakason, C. (2015). A novel method to crosslink natural rubber latex adhesive at ambient temperature. POLYMER BULLETIN, 72(1), 135-155.
Cited: 13 doi: https://doi.org/10.1007/s00289-014-1264-5
26Masa, A., Iimori, S., Saito, R., Saito, H., Sakai, T., Kaesaman, A. and Lopattananon, N. (2015). Strain-induced crystallization behavior of phenolic resin crosslinked natural rubber/clay nanocomposites. JOURNAL OF APPLIED POLYMER SCIENCE, 132(39)
Cited: 23 doi: https://doi.org/10.1002/app.42580
27Thongnuanchan, B., Ninjan, R., Kaesaman, A. and Nakason, C. (2015). Studies on the ambient temperature crosslinking of latex films based on natural rubber grafted with poly(diacetone acrylamide) using DMTA. JOURNAL OF POLYMER RESEARCH, 22(6)
Cited: 11 doi: https://doi.org/10.1007/s10965-015-0760-0
28Saiwari, S., Waesateh, K., Lopattananon, N., Thititammawong, A. and Kaesaman, A. (2015). Study on Reuse of Diphenyl Disulfide-Devulcanized Natural Rubber from Truck Tires. MACROMOLECULAR SYMPOSIA, 354(1), 155-162.
Cited: 2 doi: https://doi.org/10.1002/masy.201400103
29Lopattananon, N., Julyanon, J., Masa, A., Kaesaman, A., Thongpin, C. and Sakai, T. (2015). The role of nanofillers on (natural rubber)/(ethylene vinyl acetate)/clay nanocomposite in blending and foaming. JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 21(2), 134-146.
Cited: 20 doi: https://doi.org/10.1002/vnl.21368
30Klinpituksa, P., Kongkalai, P. and Kaesaman, A. (2014). Carboxy terminated rubber based on natural rubber grafted with acid anhydrides and its adhesion properties. 2014 GLOBAL CONFERENCE ON POLYMER AND COMPOSITE MATERIALS (PCM 2014), 62
Cited: 0 doi: https://doi.org/10.1088/1757-899X/62/1/012005
31Kaewkabpet, D., Nakason, C., Kaesaman, A. and Thitithammawong, A. (2014). Changes in Mixing Torque, Mechanical and Dynamic Rheological Properties of Epoxidized Natural Rubber and Copolyester Blends as Affected by Epoxidized Natural Rubber Contents. ADVANCES IN RUBBER, 844, 69-72.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.69
32Inted, S., Lopattananon, N., Thongnuanchan, B. and Kaesaman, A. (2014). Comparative study of NR/BR/PP and NR/NBR/PP ternary blends for high abrasion resistant thermoplastic vulcanizates. ADVANCES IN RUBBER, 844, 131-134.
Cited: 3 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.131
33Sasdipan, K., Kaesaman, A., Vennemann, N. and Nakason, C. (2014). Dynamically Cured Co-polyester/Epoxidized Natural Rubber Blends: Influence of Epoxide Contents. ADVANCES IN RUBBER, 844, 135-+.
Cited: 0 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.135
34Lamlaeh, S., Kaesaman, A. and Nakason, C. (2014). Effect of Mixing Temperature on the Mechanical, Dynamic and Morphological Properties of Maleated Natural Rubber/Copolyester Blends. ADVANCES IN RUBBER, 844, 105-108.
Cited: 0 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.105
35Lopattananon, N., Tanglakwaraskul, S., Kaesaman, A., Seadan, M. and Sakai, T. (2014). Effect of Nanoclay Addition on Morphology and Elastomeric Properties of Dynamically Vulcanized Natural Rubber/Polypropylene Nanocomposites. INTERNATIONAL POLYMER PROCESSING, 29(3), 332-341.
Cited: 14 doi: https://doi.org/10.3139/217.2935
36Lopattananon, N., Wangpradit, N., Nakason, C. and Kaesaman, A. (2014). Effect of Rubber Composition on Foaming and Properties of EVA/NR/PP Thermoplastic Vulcanisates (TPVs). JOURNAL OF RUBBER RESEARCH, 17(2), 80-95.
Cited: 8
37Chanpon, K., Thitithammawong, A., Nakason, C. and Kaesaman, A. (2014). Effect of Unmodified and Modified Epoxidized Soyabean Oils on Properties of Black-NBR Compounds and Black-NBR Vulcanizates. ADVANCES IN RUBBER, 844, 49-52.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.49
38Matchawet, S., Nakason, C. and Kaesaman, A. (2014). Electrical and Mechanical Properties of Conductive Carbon Black Filled Epoxidized Natural Rubber. ADVANCES IN RUBBER, 844, 255-258.
Cited: 11 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.255
39Boontawee, H., Nakason, C., Kaesaman, A., Thitithammawong, A. and Chewchanwuttiwong, S. (2014). Influence of benzyl ester oil on processability of silica filled NR compound. ADVANCES IN RUBBER, 844, 221-+.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.221
40Sasdipan, K., Kaesaman, A., Vennemann, N. and Nakason, C. (2014). Influence of blend ratio on properties of novel thermoplastic vulcanizates based on copolyester/epoxidized natural rubber blends. IRANIAN POLYMER JOURNAL, 23(12), 965-977.
Cited: 4 doi: https://doi.org/10.1007/s13726-014-0292-1
41Leadsang, S., Thitithammawong, A., Nakason, C. and Kaesaman, A. (2014). Influence of N-phenyl-p-phenylenediamine Modified Epoxidized Palm Oil on Properties of Carbon Black Filled Natural Rubber Compound and Vulcanizate. ADVANCES IN RUBBER, 844, 239-242.
Cited: 3 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.239
42Nakason, C., Sasdipan, K. and Kaesaman, A. (2014). Novel natural rubber-g-N-(4-hydroxyphenyl)maleimide: synthesis and its preliminary blending products with polypropylene. IRANIAN POLYMER JOURNAL, 23(1), 1-12.
Cited: 8 doi: https://doi.org/10.1007/s13726-013-0194-7
43Walong, A., Kaesaman, A., Sakai, T. and Lopattananon, N. (2014). Properties of Fire Retardant Thermoplastic Vulcanizates from NR/PP Blends Filled with Aluminium Trihydrate and Magnesium Hydroxide with Reference to the Effect of Mixing Methods. ADVANCES IN RUBBER, 844, 297-+.
Cited: 4 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.297
44Manleh, C., Nakason, C., Lopattananon, N. and Kaesaman, A. (2014). Properties of Thermoplastic Natural Rubber (TPNR): Influence of Polypropylene Grades on TPNR Properties. ADVANCES IN RUBBER, 844, 127-130.
Cited: 3 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.127
45Klinpituksa, P., Kiarttisarekul, A. and Kaesaman, A. (2014). Rubber bound phenolic antioxidant and its application in thermoplastic elastomer. ADVANCES IN MATERIALS RESEARCH-AN INTERNATIONAL JOURNAL, 3(3), 175-183.
Cited: 3 doi: https://doi.org/10.12989/amr.2014.3.3.175
46Sripornsawat, B., Kaesaman, A. and Nakason, C. (2014). Thermoplastic Natural Rubber of Co-polyamide: Effect of Blend Ratios on Mechanical, Swelling, Dynamic and Morphological Properties. ADVANCES IN RUBBER, 844, 89-92.
Cited: 1 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.89
47Lopattananon, N., Tanglakwaraskul, S., Kaesaman, A., Seadan, M. and Sakai, T. (2013). Partially Dynamically Vulcanized Thermoplastic Elastomer Based on Natural Rubber-Polypropylene-Clay Nanocomposites. MULTI-FUNCTIONAL MATERIALS AND STRUCTURES IV, 747, 230-+.
Cited: 0 doi: https://doi.org/10.4028/www.scientific.net/AMR.747.230
48Nakason, C., Nakaramontri, Y., Kaesaman, A., Kangwansukpamonkon, W. and Kiatkamjornwong, S. (2013). Synthesis and characterization of water swellable natural rubber vulcanizates. EUROPEAN POLYMER JOURNAL, 49(5), 1098-1110.
Cited: 18 doi: https://doi.org/10.1016/j.eurpolymj.2013.01.003
49Boontawee, H., Nakason, C., Kaesaman, A., Thitithammawong, A. and Chewchanwuttiwong, S. (2012). Application of Benzyl Ester of Modified Vegetable Oils as Rubber Processing Oils. ADVANCED MATERIALS, PTS 1-3, 415-417, 1164-+.
Cited: 10 doi: https://doi.org/10.4028/www.scientific.net/AMR.415-417.1164
50Boontawee, H., Nakason, C., Kaesaman, A., Thitithammawong, A. and Chewchanwuttiwong, S. (2012). Comparative Properties of Vegetable Oil-Based Benzyl Esters and Vegetable Oils as Processing Oil in Natural Rubber Compounds. ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY, 626, 237-+.
Cited: 5 doi: https://doi.org/10.4028/www.scientific.net/AMR.626.237
51Kaewsakul, W., Kaesaman, A. and Nakason, C. (2012). Dual phase continuity and phase inversion phenomena in natural rubber/ethylene vinyl acetate (EVA) copolymer blends. E-POLYMERS
Cited: 2
52Shpornsawat, B., Nakason, C. and Kaesaman, A. (2012). Effect of Modified Natural Rubber on Properties of Thermoplastic Natural Rubber Based on Co-polyamide Blends. ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY, 626, 233-236.
Cited: 5 doi: https://doi.org/10.4028/www.scientific.net/AMR.626.233
53Manleh, C., Nakason, C., Lopattananon, N. and Kaesaman, A. (2012). Effect of Sulfur Donor on Properties of Thermoplastic Vulcanizates based on NR/PP. ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY, 626, 54-57.
Cited: 4 doi: https://doi.org/10.4028/www.scientific.net/AMR.626.54
54Sasdipan, K., Kaesaman, A. and Nakason, C. (2012). Thermoplastic Natural Rubber based on Blending of Co-polyester: Effect of Amount of Epoxide Groups in Epoxidized Natural Rubber on Preperties. ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY, 626, 50-53.
Cited: 3 doi: https://doi.org/10.4028/www.scientific.net/AMR.626.50
55Lamlaeh, S., Kaesaman, A. and Nakason, C. (2012). Thermoplastic Natural Rubber Based on Blending of Maleated Natural Rubber and Copolyester: Effect of Blend Ratios on Mechanical, Thermal, Dynamic and Morphological Properties.. ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY, 626, 66-70.
Cited: 5 doi: https://doi.org/10.4028/www.scientific.net/AMR.626.66
56Nakason, C., Kaewsakul, W. and Kaesaman, A. (2012). Thermoplastic natural rubbers based on blending of ethylene-vinyl acetate copolymer with different types of natural rubber. JOURNAL OF ELASTOMERS AND PLASTICS, 44(1), 89-111.
Cited: 12 doi: https://doi.org/10.1177/0095244311413441
57Kalkornsurapranee, E., Sahakaro, K., Kaesaman, A. and Nakason, C. (2010). Influence of Reaction Volume on the Properties of Natural Rubber-g-Methyl Methacrylate. JOURNAL OF ELASTOMERS AND PLASTICS, 42(1), 17-34.
Cited: 10 doi: https://doi.org/10.1177/0095244309345410
58Yumae, N., Kaesaman, A., Rungvichaniwat, A., Thepchalerm, C. and Nakason, C. (2010). Novel Creaming Agent for Preparation of Creamed Concentrated Natural Rubber Latex. JOURNAL OF ELASTOMERS AND PLASTICS, 42(5), 453-470.
Cited: 11 doi: https://doi.org/10.1177/0095244310374227
59Nakason, C., Wohmang, T., Kaesaman, A. and Kiatkamjornwong, S. (2010). Preparation of cassava starch-graft-polyacrylamide superabsorbents and associated composites by reactive blending. CARBOHYDRATE POLYMERS, 81(2), 348-357.
Cited: 65 doi: https://doi.org/10.1016/j.carbpol.2010.02.030
60Kalkornsurapranee, E., Sahakaro, K., Kaesaman, A. and Nakason, C. (2009). From a Laboratory to a Pilot Scale Production of Natural Rubber Grafted with PMMA. JOURNAL OF APPLIED POLYMER SCIENCE, 114(1), 587-597.
Cited: 22 doi: https://doi.org/10.1002/app.30529
61Nakason, C., Jarnthong, M., Kaesaman, A. and Kiatkamjornwong, S. (2009). Influences of Blend Proportions and Curing Systems on Dynamic, Mechanical, and Morphological Properties of Dynamically Cured Epoxidized Natural Rubber/High-Density Polyethylene Blends. POLYMER ENGINEERING AND SCIENCE, 49(2), 281-292.
Cited: 25 doi: https://doi.org/10.1002/pen.21256
62Thitithammawong, A., Noordermeer, JWM., Kaesaman, A. and Nakason, C. (2008). Influence of compatibilizers on the rheological, mechanical and morphological properties of epoxidized natural rubber/polypropylene thermoplastic vulcanizates. JOURNAL OF APPLIED POLYMER SCIENCE, 107(4), 2436-2443.
Cited: 30 doi: https://doi.org/10.1002/app.27233
63Pichaiyut, S., Nakason, C., Kaesaman, A. and Kiatkamjornwong, S. (2008). Influences of blend compatibilizers on dynamic, mechanical, and morphological properties of dynamically cured maleated natural rubber and high-density polyethylene blends. POLYMER TESTING, 27(5), 566-580.
Cited: 37 doi: https://doi.org/10.1016/j.polymertesting.2008.03.004
64Nakason, C., Jamjinno, S., Kaesaman, A. and Kiatkalmjornwong, S. (2008). Thermoplastic elastomer based on high-density polyethylene/natural rubber blends: rheological, thermal, and morphological properties. POLYMERS FOR ADVANCED TECHNOLOGIES, 19(2), 85-98.
Cited: 20 doi: https://doi.org/10.1002/pat.972
65Nakason, C., Jarnthong, M., Kaesaman, A. and Kiatkamjornwong, S. (2008). Thermoplastic elastomers based on epoxidized natural rubber and high-density polyethylene blends: Effect of blend compatibilizers on the mechanical and morphological properties. JOURNAL OF APPLIED POLYMER SCIENCE, 109(4), 2694-2702.
Cited: 37 doi: https://doi.org/10.1002/app.28265
66Thongnuanchan, B., Nokkaew, K., Kaesaman, A. and Nakason, C. (2007). Epoxidized natural rubber-bonded para rubber wood particleboard. POLYMER ENGINEERING AND SCIENCE, 47(4), 421-428.
Cited: 25 doi: https://doi.org/10.1002/pen.20668
67Lohakul, A., Kaesaman, A., Rungvichaniwat, A. and Nakason, C. (2007). Rheological properties of calcium carbonate-epoxidized natural rubber composites prepared in latex state. E-POLYMERS
Cited: 0
68Nakason, C., Nuansomsri, K., Kaesaman, A. and Kiatkamjornwong, S. (2006). Dynamic vulcanization of natural rubber/high-density polyethylene blends: Effect of compatibilization, blend ratio and curing system. POLYMER TESTING, 25(6), 782-796.
Cited: 83 doi: https://doi.org/10.1016/j.polymertesting.2006.05.001
69Nakason, C., Wannavilai, P. and Kaesaman, A. (2006). Effect of vulcanization system on properties of thermoplastic vulcanizates based on epoxidized natural rubber/polypropylene blends. POLYMER TESTING, 25(1), 34-41.
Cited: 107 doi: https://doi.org/10.1016/j.polymertesting.2005.09.007
70Nakason, C., Saiwari, S. and Kaesaman, A. (2006). Rheological properties of maleated natural rubber/polypropylene blends with phenolic modified polypropylene and polypropylene-g-maleic anhydride compatibilizers. POLYMER TESTING, 25(3), 413-423.
Cited: 68 doi: https://doi.org/10.1016/j.polymertesting.2005.11.006
71Nakason, C., Saiwaree, S., Tatun, S. and Kaesaman, A. (2006). Rheological, thermal and morphological properties of maleated natural rubber and its reactive blending with poly(methyl methacrylate). POLYMER TESTING, 25(5), 656-667.
Cited: 77 doi: https://doi.org/10.1016/j.polymertesting.2006.03.011
72Nakason, C., Pechurai, W., Sahakaro, K. and Kaesaman, A. (2006). Rheological, thermal, and curing properties of natural rubber-g-poly(methyl methacrylate). JOURNAL OF APPLIED POLYMER SCIENCE, 99(4), 1600-1614.
Cited: 25 doi: https://doi.org/10.1002/app.22518
73Nakason, C., Wannavilai, P. and Kaesaman, A. (2006). Thermoplastic vulcanizates based on epoxidized natural rubber/polypropylene blends: Effect of compatibilizers and reactive blending. JOURNAL OF APPLIED POLYMER SCIENCE, 100(6), 4729-4740.
Cited: 54 doi: https://doi.org/10.1002/app.23260
74Nakason, C., Wannavilai, P. and Kaesaman, A. (2006). Thermoplastic vulcanizates based on epoxidized natural rubber/polypropylene blends: Effect of epoxide levels in ENR molecules. JOURNAL OF APPLIED POLYMER SCIENCE, 101(5), 3046-3052.
Cited: 27 doi: https://doi.org/10.1002/app.23926
75Nakason, C., Saiwari, S. and Kaesaman, A. (2006). Thermoplastic vulcanizates based on maleated natural rubber/polypropylene blends: Effect of blend ratios on rheological, mechanical, and morphological properties. POLYMER ENGINEERING AND SCIENCE, 46(5), 594-600.
Cited: 39 doi: https://doi.org/10.1002/pen.20498
76Nakason, C., Kaesaman, A. and Eardrod, K. (2005). Cure and mechanical properties of natural rubber-g-poly(methyl methacrylate)-cassava starch compounds. MATERIALS LETTERS, 59(29-30), 4020-4025.
Cited: 72 doi: https://doi.org/10.1016/j.matlet.2005.07.057
77Nakason, C., Pechurai, W., Sahakaro, K. and Kaesaman, A. (2005). Rheological, mechanical and morphological properties of thermoplastic vulcanizates based on NR-g-PMMA/PMMA blends. POLYMERS FOR ADVANCED TECHNOLOGIES, 16(8), 592-599.
Cited: 29 doi: https://doi.org/10.1002/pat.634
78Nakason, C., Tobprakhon, A. and Kaesarnan, A. (2005). Thermoplastic vulcanizates based on poly(methyl methacrylate)/epoxidized natural rubber blends: Mechanical, thermal, and morphological properties. JOURNAL OF APPLIED POLYMER SCIENCE, 98(3), 1251-1261.
Cited: 22 doi: https://doi.org/10.1002/app.21908
79Nakason, C., Panklieng, Y. and Kaesaman, A. (2004). Rheological and thermal properties of thermoplastic natural rubbers based on poly(methyl methacrylate)/epoxidized-natural-rubber blends. JOURNAL OF APPLIED POLYMER SCIENCE, 92(6), 3561-3572.
Cited: 41 doi: https://doi.org/10.1002/app.20384
80Nakason, C., Kaesaman, A., Sainamsai, W. and Kiatkamjornwong, S. (2004). Rheological behavior of reactive blending of epoxidized natural rubber with cassava starch and epoxidized natural rubber with natural rubber and cassava starch. JOURNAL OF APPLIED POLYMER SCIENCE, 91(3), 1752-1762.
Cited: 9 doi: https://doi.org/10.1002/app.13248
81Nakason, C., Kaesaman, A. and Supasanthitikul, P. (2004). The grafting of maleic anhydride onto natural rubber. POLYMER TESTING, 23(1), 35-41.
Cited: 168 doi: https://doi.org/10.1016/S0142-9418(03)00059-X
82Nakason, C., Kaesaman, A. and Yimwan, N. (2003). Preparation of graft copolymers from deproteinized and high ammonia concentrated natural rubber latices with methyl methacrylate. JOURNAL OF APPLIED POLYMER SCIENCE, 87(1), 68-75.
Cited: 47 doi: https://doi.org/10.1002/app.11671
83Nakason, C., Kaesaman, A., Rungvichaniwat, A., Eardrod, K. and Kiatkamjornwong, S. (2003). Rheological and curing behavior of reactive blending.: II.: Natural rubber-g-poly(methyl methacrylate)-cassava starch. JOURNAL OF APPLIED POLYMER SCIENCE, 89(6), 1453-1463.
Cited: 20 doi: https://doi.org/10.1002/app.12191
84Nakason, C., Kaesaman, A., Samoh, Z., Homsin, S. and Kiatkamjornwong, S. (2002). Rheological properties of maleated natural rubber and natural rubber blends. POLYMER TESTING, 21(4), 449-455.
Cited: 75 doi: https://doi.org/10.1016/S0142-9418(01)00109-X
รวม WoS/ISI 84 รายการ 1,694 citations
ตาราง ผลงานตีพิมพ์ Scopus ของ อาซีซัน แกสมาน
ลำดับรายละเอียดผลงาน
1Kaesaman A., Chiponbarn S. and Nakason C. (2024). Curing, rheological, mechanical, and flame retardant properties of high thermal-resistant dibutyl phosphate-bound natural rubber. Express Polymer Letters, 18(6), 623-637.
Cited: 0 doi: https://doi.org/10.3144/expresspolymlett.2024.46
2Kaesaman A., Intharapat P. and Nakason C. (2024). Flame Retardancy and Properties of Thermoplastic Vulcanizates from Dibutyl Phosphate-Bound Natural Rubber/Ethylene Vinyl Acetate Blends. Polymer-Plastics Technology and Materials
Cited: 0 doi: https://doi.org/10.1080/25740881.2024.2393781
3Kaesaman A., Kaewchuen S. and Nakason C. (2024). Implementing eco-friendly creaming agents to address coagulation issues and minimize acid consumption in skim natural rubber latex processing. Industrial Crops and Products, 222
Cited: 0 doi: https://doi.org/10.1016/j.indcrop.2024.119499
4Nakason C., Chewchanwuttiwong S., Hathak C., Petsiri S. and Kaesaman A. (2024). Sustainable multi-functional additives: Zinc soaps from vegetable oil and fatty acids in natural rubber compounds. Industrial Crops and Products, 217
Cited: 0 doi: https://doi.org/10.1016/j.indcrop.2024.118827
5Nakason C., Manleh C., Lopattananon N. and Kaesaman A. (2024). The influence of crosslink characteristics on key properties of dynamically cured NR/PP blends. Express Polymer Letters, 18(5), 487-503.
Cited: 0 doi: https://doi.org/10.3144/expresspolymlett.2024.36
6Kaesaman A., Romin R. and Nakason C. (2023). Influence of epoxide content and blend ratios on strength and damping properties of thermoplastic vulcanizates based on epoxidized natural rubber and poly(ether-block-amide) copolymer blends. Express Polymer Letters, 17(10), 1056-1069.
Cited: 0 doi: https://doi.org/10.3144/expresspolymlett.2023.79
7Kaesaman A., Lamleah S. and Nakason C. (2023). Influence of vulcanization system on curing, mechanical, dynamic and morphological properties of maleated natural rubber and its thermoplastic vulcanizate with thermoplastic copolyester elastomer. Express Polymer Letters, 17(7), 675-689.
Cited: 0 doi: https://doi.org/10.3144/expresspolymlett.2023.50
8Kaesaman A., Boontawee H., Chewchanwuttiwong S. and Nakason C. (2022). Influence of benzyl esters of vegetable oils on curing, mechanical and dynamic properties of silica filled natural rubber and styrene-butadiene rubber compounds. Express Polymer Letters, 16(5), 540-556.
Cited: 0 doi: https://doi.org/10.3144/expresspolymlett.2022.40
9Nakason C., Pichaiyut S., Vennemann N. and Kaesaman A. (2022). Influence of processing oil on properties of dynamically cured epoxidized natural rubber and thermoplastic polyurethane blends. Polymer Bulletin
Cited: 0 doi: https://doi.org/10.1007/s00289-022-04430-9
10Sawangpet K., Walong A., Thongnuanchan B., Kaesaman A., Sakai T. and Lopattananon N. (2020). Foaming and Physical Properties, Flame Retardancy, and Combustibility of Polyethylene Octene Foams Modified by Natural Rubber and Expandable Graphite. Journal of Vinyl and Additive Technology, 26(4), 423-433.
Cited: 1 doi: https://doi.org/10.1002/vnl.21757
11Sawangpet K., Walong A., Kaesaman A., Thongnuanchan B., Sakai T. and Lopattananon N. (2020). Structure, physical properties, and flame retardancy of POE/NR/EG blend foams: Effect of crosslinking. Malaysian Journal of Fundamental and Applied Sciences, 16(1), 44-50.
Cited: 1 doi: https://doi.org/10.11113/mjfas.v16n1.1418
12Adair A., Kaesaman A. and Klinpituksa P. (2020). Water-swellable rubber blend from epoxidized natural rubber and superabsorbent polymer composite. Progress in Rubber, Plastics and Recycling Technology, 36(1), 63-77.
Cited: 2 doi: https://doi.org/10.1177/1477760619895025
13Lopattananon N., Walong A., Kaesaman A. and Sakai T. (2019). Mechanical, thermal and fire retardant characteristics of NR/PP/ATH thermoplastic vulcanizates. Walailak Journal of Science and Technology, 16(10), 723-737.
Cited: 1
14Thongnuanchan B., Ninjan R., Kaesaman A. and Nakason C. (2018). Synthesis of modified Natural Rubber with grafted poly(acetoacetoxyethyl methacrylate-co-methyl methacrylate) and performance of derived adhesives with GTA crosslinker. Polymer Engineering and Science, 58(9), 1610-1618.
Cited: 6 doi: https://doi.org/10.1002/pen.24750
15Boontawee H., Nakason C., Kaesaman A., Thitithammawong A. and Chewchanwuttiwong S. (2017). Benzyl Esters of Vegetable Oils as Processing Oil in Carbon Black–Filled SBR Compounding: Chemical Modification, Characterization, and Performance. Advances in Polymer Technology, 36(3), 320-330.
Cited: 9 doi: https://doi.org/10.1002/adv.21610
16Matchawet S., Kaesaman A., Vennemann N., Kumerl?we C. and Nakason C. (2017). Effects of imidazolium ionic liquid on cure characteristics, electrical conductivity and other related properties of epoxidized natural rubber vulcanizates. European Polymer Journal, 87, 344-359.
Cited: 18 doi: https://doi.org/10.1016/j.eurpolymj.2016.12.037
17Matchawet S., Kaesaman A., Bomlai P. and Nakason C. (2017). Effects of multi-walled carbon nanotubes and conductive carbon black on electrical, dielectric, and mechanical properties of epoxidized natural rubber composites. Polymer Composites, 38(6), 1031-1042.
Cited: 10 doi: https://doi.org/10.1002/pc.23666
18Adair A., Klinpituksa P. and Kaesaman A. (2017). Influences of neutralization of superabsorbent hydrogel from hydroxyethyl cellulose on water swelling capacities. AIP Conference Proceedings, 1868
Cited: 4 doi: https://doi.org/10.1063/1.4995098
19Masa A., Saito H., Sakai T., Kaesaman A. and Lopattananon N. (2017). Morphological evolution and mechanical property enhancement of natural rubber/polypropylene blend through compatibilization by nanoclay. Journal of Applied Polymer Science, 134(10)
Cited: 17 doi: https://doi.org/10.1002/app.44574
20Matchawet S., Kaesaman A., Vennemann N., Kummerl?we C. and Nakason C. (2017). Optimization of Electrical Conductivity, Dielectric Properties, and Stress Relaxation Behavior of Conductive Thermoplastic Vulcanizates Based on ENR/COPA Blends by Adjusting Mixing Method and Ionic Liquid Loading. Industrial and Engineering Chemistry Research, 56(13), 3629-3639.
Cited: 8 doi: https://doi.org/10.1021/acs.iecr.7b00252
21Adair A., Kaesaman A. and Klinpituksa P. (2017). Superabsorbent materials derived from hydroxyethyl cellulose and bentonite: Preparation, characterization and swelling capacities. Polymer Testing, 64, 321-329.
Cited: 23 doi: https://doi.org/10.1016/j.polymertesting.2017.10.018
22Pakhathirathien C., Pearuang K., Rungvichaniwat A., Kaesaman A. and Nakason C. (2016). A comparative study of stearyl aromatic esters and aromatic oil as processing aids in natural rubber compounds. Songklanakarin Journal of Science and Technology, 38(5), 501-506.
Cited: 1
23Lopattananon N., Walong A., Kaesaman A. and Seadan M. (2016). Effect of MAH-g-PP on the Performance of ATH filled NR/PP Thermoplastic Vulcanisates. Journal of Rubber Research, 19(4), 243-260.
Cited: 5
24Matchawet S., Kaesaman A., Bomlai P. and Nakason C. (2016). Electrical, dielectric, and dynamic mechanical properties of conductive carbon black/epoxidized natural rubber composites. Journal of Composite Materials, 50(16), 2191-2202.
Cited: 23 doi: https://doi.org/10.1177/0021998315602941
25Masa A., Saito R., Saito H., Sakai T., Kaesaman A. and Lopattananon N. (2016). Phenolic resin-crosslinked natural rubber/clay nanocomposites: Influence of clay loading and interfacial adhesion on strain-induced crystallization behavior. Journal of Applied Polymer Science, 133(12)
Cited: 15 doi: https://doi.org/10.1002/app.43214
26Sasdipan K., Kaesaman A., Kummerl?we C., Vennemann N. and Nakason C. (2016). Recyclability of novel dynamically cured copolyester/epoxidized natural rubber blends. Journal of Material Cycles and Waste Management, 18(1), 156-167.
Cited: 0 doi: https://doi.org/10.1007/s10163-014-0324-0
27Thongnuanchan B., Ninjan R., Kaesaman A. and Nakason C. (2015). A novel method to crosslink natural rubber latex adhesive at ambient temperature. Polymer Bulletin, 72(1), 135-155.
Cited: 10 doi: https://doi.org/10.1007/s00289-014-1264-5
28Sakmat J., Lopattananon N. and Kaesaman A. (2015). Effect of fiber surface modification on properties of artificial leather from leather fiber filled natural rubber composites. Key Engineering Materials, 659, 378-382.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/KEM.659.378
29Julyanon J., Kaesaman A., Sakai T. and Lopattananon N. (2015). Improvement of structure and properties of nanocomposite foams based on ethylene-vinyl acetate (EVA)/natural rubber (NR)/nanoclay: Effect of NR addition. Key Engineering Materials, 659, 418-422.
Cited: 5 doi: https://doi.org/10.4028/www.scientific.net/KEM.659.418
30Masa A., Iimori S., Saito R., Saito H., Sakai T., Kaesaman A. and Lopattananon N. (2015). Strain-induced crystallization behavior of phenolic resin crosslinked natural rubber/clay nanocomposites. Journal of Applied Polymer Science, 132(39)
Cited: 15 doi: https://doi.org/10.1002/app.42580
31Thongnuanchan B., Ninjan R., Kaesaman A. and Nakason C. (2015). Studies on the ambient temperature crosslinking of latex films based on natural rubber grafted with poly(diacetone acrylamide) using DMTA. Journal of Polymer Research, 22(6), 1-11.
Cited: 14 doi: https://doi.org/10.1007/s10965-015-0760-0
32Saiwari S., Waesateh K., Lopattananon N., Thititammawong A. and Kaesaman A. (2015). Study on reuse of diphenyl disulfide-devulcanized natural rubber from truck tires. Macromolecular Symposia, 354(1), 155-162.
Cited: 1 doi: https://doi.org/10.1002/masy.201400103
33Lopattananon N., Julyanon J., Masa A., Kaesaman A., Thongpin C. and Sakai T. (2015). The role of nanofillers on (natural rubber)/(ethylene vinyl acetate)/clay nanocomposite in blending and foaming. Journal of Vinyl and Additive Technology, 21(2), 134-146.
Cited: 15 doi: https://doi.org/10.1002/vnl.21368
34Klinpituksa P., Kongkalai P. and Kaesaman A. (2014). Carboxy terminated rubber based on natural rubber grafted with acid anhydrides and its adhesion properties. IOP Conference Series: Materials Science and Engineering, 62(1)
Cited: 0 doi: https://doi.org/10.1088/1757-899X/62/1/012005
35Kaewkabpet D., Nakason C., Kaesaman A. and Thitithammawong A. (2014). Changes in mixing torque, mechanical and dynamic rheological properties of epoxidized natural rubber and copolyester blends as affected by epoxidized natural rubber contents. Advanced Materials Research, 844, 69-72.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.69
36Inted S., Lopattananon N., Thongnuanchan B. and Kaesaman A. (2014). Comparative study of NR/BR/PP and NR/NBR/PP ternary blends for high abrasion resistant thermoplastic vulcanizates. Advanced Materials Research, 844, 131-134.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.131
37Sasdipan K., Kaesaman A., Vennemann N. and Nakason C. (2014). Dynamically cured co-polyester/epoxidized natural rubber blends: Influence of epoxide contents. Advanced Materials Research, 844, 135-139.
Cited: 0 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.135
38Lamlaeh S., Kaesaman A. and Nakason C. (2014). Effect of mixing temperature on the mechanical, dynamic and morphological properties of maleated natural rubber/copolyester blends. Advanced Materials Research, 844, 105-108.
Cited: 0 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.105
39Lopattananon N., Tanglakwaraskul S., Kaesaman A., Seadan M. and Sakai T. (2014). Effect of nanoclay addition on morphology and elastomeric properties of dynamically vulcanized natural rubber/polypropylene nanocomposites. International Polymer Processing, 29(3), 332-341.
Cited: 15 doi: https://doi.org/10.3139/217.2935
40Lopattananon N., Wangpradit N., Nakason C. and Kaesaman A. (2014). Effect of rubber composition on foaming and properties of EVA/NR/PP thermoplastic vulcanisates (TPVs). Journal of Rubber Research, 17(2), 80-95.
Cited: 12
41Chanpon K., Thitithammawong A., Nakason C. and Kaesaman A. (2014). Effect of unmodified and modified epoxidized soyabean oils on properties of black-NBR compounds and black-NBR vulcanizates. Advanced Materials Research, 844, 49-52.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.49
42Matchawet S., Nakason C. and Kaesaman A. (2014). Electrical and mechanical properties of conductive carbon black filled epoxidized natural rubber. Advanced Materials Research, 844, 255-258.
Cited: 6 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.255
43Boontawee H., Nakason C., Kaesaman A., Thitithammawong A. and Chewchanwuttiwong S. (2014). Influence of benzyl ester oil on processability of silica filled NR compound. Advanced Materials Research, 844, 221-224.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.221
44Sasdipan K., Kaesaman A., Vennemann N. and Nakason C. (2014). Influence of blend ratio on properties of novel thermoplastic vulcanizates based on copolyester/epoxidized natural rubber blends. Iranian Polymer Journal (English Edition), 23(12), 965-977.
Cited: 2 doi: https://doi.org/10.1007/s13726-014-0292-1
45Ieadsang S., Thitithammawong A., Nakason C. and Kaesaman A. (2014). Influence of N-phenyl-p-phenylenediamine modified epoxidized palm oil on properties of carbon black filled natural rubber compound and vulcanizate. Advanced Materials Research, 844, 239-242.
Cited: 3 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.239
46Nakason C., Sasdipan K. and Kaesaman A. (2014). Novel natural rubber-g-N-(4-hydroxyphenyl)maleimide: Synthesis and its preliminary blending products with polypropylene. Iranian Polymer Journal (English Edition), 23(1), 1-12.
Cited: 7 doi: https://doi.org/10.1007/s13726-013-0194-7
47Walong A., Kaesaman A., Sakai T. and Lopattananon N. (2014). Properties of fire retardant thermoplastic vulcanizates from NR/PP blends filled with Aluminium trihydrate and magnesium hydroxide with reference to the effect of mixing methods. Advanced Materials Research, 844, 297-300.
Cited: 6 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.297
48Manleh C., Nakason C., Lopattananon N. and Kaesaman A. (2014). Properties of thermoplastic natural rubber (TPNR): Influence of polypropylene grades on TPNR properties. Advanced Materials Research, 844, 127-130.
Cited: 3 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.127
49Sripornsawat B., Kaesaman A. and Nakason C. (2014). Thermoplastic natural rubber of co-polyamide: Effect of blend ratios on mechanical, swelling, dynamic and morphological properties. Advanced Materials Research, 844, 89-92.
Cited: 2 doi: https://doi.org/10.4028/www.scientific.net/AMR.844.89
50Boontawee H., Nakason C., Kaesaman A., Thitithammawong A. and Chewchanwuttiwong S. (2013). Comparative properties of vegetable oil-based benzyl esters and vegetable oils as processing oil in natural rubber compounds. Advanced Materials Research, 626, 237-239.
Cited: 3 doi: https://doi.org/10.4028/www.scientific.net/AMR.626.237
51Sripornsawat B., Nakason C. and Kaesaman A. (2013). Effect of modified natural rubber on properties of thermoplastic natural rubber based on Co-polyamide blends. Advanced Materials Research, 626, 233-236.
Cited: 5 doi: https://doi.org/10.4028/www.scientific.net/AMR.626.233
52Manleh C., Nakason C., Lopattananon N. and Kaesaman A. (2013). Effect of sulfur donor on properties of thermoplastic vulcanizatesbased on NR/PP. Advanced Materials Research, 626, 54-57.
Cited: 1 doi: https://doi.org/10.4028/www.scientific.net/AMR.626.54
53Lopattananon N., Tanglakwaraskul S., Kaesaman A., Seadan M. and Sakai T. (2013). Partially dynamically vulcanized thermoplastic elastomer based on natural rubber-polypropylene-clay nanocomposites. Advanced Materials Research, 747, 230-233.
Cited: 1 doi: https://doi.org/10.4028/www.scientific.net/AMR.747.230
54Sasdipan K., Kaesaman A. and Nakason C. (2013). Thermoplastic natural rubber based on blending of co-polyester: Effectof amount of epoxide groups in epoxidized natural rubber onpreperties. Advanced Materials Research, 626, 50-53.
Cited: 3 doi: https://doi.org/10.4028/www.scientific.net/AMR.626.50
55Lamlaeh S., Kaesaman A. and Nakason C. (2013). Thermoplastic natural rubber based on blending of maleated natural rubber and copolyester: Effect of blend ratios on mechanical, thermal, dynamic and morphological properties. Advanced Materials Research, 626, 66-70.
Cited: 5 doi: https://doi.org/10.4028/www.scientific.net/AMR.626.66
56Boontawee H., Nakason C., Kaesaman A., Thitithammawong A. and Chewchanwuttiwong S. (2012). Application of benzyl ester of modified vegetable oils as rubber processing oils. Advanced Materials Research, 415-417, 1164-1167.
Cited: 9 doi: https://doi.org/10.4028/www.scientific.net/AMR.415-417.1164
57Kaewsakul W., Kaesaman A. and Nakason C. (2012). Dual phase continuity and phase inversion phenomena in natural rubber/ethylene vinyl acetate (EVA) copolymer blends. E-Polymers
Cited: 2 doi: https://doi.org/10.1515/epoly.2012.12.1.47
58Nakason C., Kaewsakul W. and Kaesaman A. (2012). Thermoplastic natural rubbers based on blending of ethylene-vinyl acetate copolymer with different types of natural rubber. Journal of Elastomers and Plastics, 44(1), 89-111.
Cited: 9 doi: https://doi.org/10.1177/0095244311413441
59Kalkornsurapranee E., Sahakaro K., Kaesaman A. and Nakason C. (2010). Influence of reaction volume on the properties of natural rubber-g-methyl methacrylate. Journal of Elastomers and Plastics, 42(1), 17-34.
Cited: 9 doi: https://doi.org/10.1177/0095244309345410
60Yumae N., Kaesaman A., Rungvichaniwat A., Thepchalerm C. and Nakason C. (2010). Novel creaming agent for preparation of creamed concentrated natural rubber latex. Journal of Elastomers and Plastics, 42(5), 453-470.
Cited: 8 doi: https://doi.org/10.1177/0095244310374227
61Nakason C., Wohmang T., Kaesaman A. and Kiatkamjornwong S. (2010). Preparation of cassava starch-graft-polyacrylamide superabsorbents and associated composites by reactive blending. Carbohydrate Polymers, 81(2), 348-357.
Cited: 70 doi: https://doi.org/10.1016/j.carbpol.2010.02.030
62Kalkornsurapranee E., Sahakaro K., Kaesaman A. and Nakason C. (2009). From a laboratory to a pilot scale production of natural rubber grafted with PMMA. Journal of Applied Polymer Science, 114(1), 587-597.
Cited: 23 doi: https://doi.org/10.1002/app.30529
63Nakason C., Jarnthong M., Kaesaman A. and Kiatkamjornwong S. (2009). Influences of blend proportions and curing systems on dynamic, mechanical, and morphological properties of dynamically cured epoxidized natural rubber/high-density polyethylene blends. Polymer Engineering and Science, 49(2), 281-292.
Cited: 26 doi: https://doi.org/10.1002/pen.21256
64Saijun D., Nakason C., Kaesaman A. and Klinpituksa P. (2009). Water absorption and mechanical properties of water-swellable natural rubber. Songklanakarin Journal of Science and Technology, 31(5), 561-565.
Cited: 32
65Thitithammawong A., Noordermeer J., Kaesaman A. and Nakason C. (2008). Influence of compatibilizers on the rheological, mechanical, and morphological properties of epoxidized natural rubber/polypropylene thermoplastic vulcanizates. Journal of Applied Polymer Science, 107(4), 2436-2443.
Cited: 27 doi: https://doi.org/10.1002/app.27233
66Pichaiyut S., Nakason C., Kaesaman A. and Kiatkamjornwong S. (2008). Influences of blend compatibilizers on dynamic, mechanical, and morphological properties of dynamically cured maleated natural rubber and high-density polyethylene blends. Polymer Testing, 27(5), 566-580.
Cited: 35 doi: https://doi.org/10.1016/j.polymertesting.2008.03.004
67Nakason C., Jamjinno S., Kaesaman A. and Kiatkamjornwong S. (2008). Thermoplastic elastomer based on high-density polyethylene/natural rubber blends: Rheological, thermal, and morphological properties. Polymers for Advanced Technologies, 19(2), 85-98.
Cited: 19 doi: https://doi.org/10.1002/pat.972
68Nakason C., Jarnthong M., Kaesaman A. and Kiatkamjornwong S. (2008). Thermoplastic elastomers based on epoxidized natural rubber and high-density polyethylene blends: Effect of blend compatibilizers on the mechanical and morphological properties. Journal of Applied Polymer Science, 109(4), 2694-2702.
Cited: 29 doi: https://doi.org/10.1002/app.28265
69Thongnuanchan B., Nokkaew K., Kaesaman A. and Nakason C. (2007). Epoxidized natural rubber-bonded para rubber wood particleboard. Polymer Engineering and Science, 47(4), 421-428.
Cited: 22 doi: https://doi.org/10.1002/pen.20668
70Lohakul A., Kaesaman A., Rungvichaniwat A. and Nakason C. (2007). Rheological properties of calcium carbonate-epoxidized natural rubber composites prepared in latex state. E-Polymers, 1-11.
Cited: 1 doi: https://doi.org/10.1515/epoly.2007.7.1.78
71Nakason C., Nuansomsri K., Kaesaman A. and Kiatkamjornwong S. (2006). Dynamic vulcanization of natural rubber/high-density polyethylene blends: Effect of compatibilization, blend ratio and curing system. Polymer Testing, 25(6), 782-796.
Cited: 73 doi: https://doi.org/10.1016/j.polymertesting.2006.05.001
72Nakason C., Wannavilai P. and Kaesaman A. (2006). Effect of vulcanization system on properties of thermoplastic vulcanizates based on epoxidized natural rubber/polypropylene blends. Polymer Testing, 25(1), 34-41.
Cited: 103 doi: https://doi.org/10.1016/j.polymertesting.2005.09.007
73Nakason C., Saiwari S. and Kaesaman A. (2006). Rheological properties of maleated natural rubber/polypropylene blends with phenolic modified polypropylene and polypropylene-g-maleic anhydride compatibilizers. Polymer Testing, 25(3), 413-423.
Cited: 60 doi: https://doi.org/10.1016/j.polymertesting.2005.11.006
74Nakason C., Saiwari S., Tatun S. and Kaesaman A. (2006). Rheological, thermal and morphological properties of maleated natural rubber and its reactive blending with poly(methyl methacrylate). Polymer Testing, 25(5), 656-667.
Cited: 72 doi: https://doi.org/10.1016/j.polymertesting.2006.03.011
75Nakason C., Pechurai W., Sahakaro K. and Kaesaman A. (2006). Rheological, thermal, and curing properties of natural rubber-g-poly(methyl methacrylate). Journal of Applied Polymer Science, 99(4), 1600-1614.
Cited: 25 doi: https://doi.org/10.1002/app.22518
76Nakason C., Wannavilai P. and Kaesaman A. (2006). Thermoplastic vulcanizates based on epoxidized natural rubber/polypropylene blends: Effect of compatibilizers and reactive blending. Journal of Applied Polymer Science, 100(6), 4729-4740.
Cited: 45 doi: https://doi.org/10.1002/app.23260
77Nakason C., Wannavilai P. and Kaesaman A. (2006). Thermoplastic vulcanizates based on epoxidized natural rubber/polypropylene blends: Effect of epoxide levels in ENR molecules. Journal of Applied Polymer Science, 101(5), 3046-3052.
Cited: 23 doi: https://doi.org/10.1002/app.23926
78Nakason C., Saiwari S. and Kaesaman A. (2006). Thermoplastic vulcanizates based on maleated natural rubber/polypropylene blends: Effect of blend ratios on rheological, mechanical, and morphological properties. Polymer Engineering and Science, 46(5), 594-600.
Cited: 31 doi: https://doi.org/10.1002/pen.20498
79Nakason C., Kaesaman A. and Eardrod K. (2005). Cure and mechanical properties of natural rubber-g-poly(methyl methacrylate)-cassava starch compounds. Materials Letters, 59(29-30), 4020-4025.
Cited: 64 doi: https://doi.org/10.1016/j.matlet.2005.07.057
80Nakason C., Pechurai W., Sahakaro K. and Kaesaman A. (2005). Rheological, mechanical and morphological properties of thermoplastic vulcanizates based on NR-g-PMMA/PMMA blends. Polymers for Advanced Technologies, 16(8), 592-599.
Cited: 26 doi: https://doi.org/10.1002/pat.634
81Nakason C., Tobprakhon A. and Kaesaman A. (2005). Thermoplastic vulcanizates based on poly(methyl methacrylate)/epoxidized natural rubber blends: Mechanical, thermal, and morphological properties. Journal of Applied Polymer Science, 98(3), 1251-1261.
Cited: 25 doi: https://doi.org/10.1002/app.21908
82Nakason C., Panklieng Y. and Kaesaman A. (2004). Rheological and thermal properties of thermoplastic natural rubbers based on poly(methyl methacrylate)/epoxidized-natural-rubber blends. Journal of Applied Polymer Science, 92(6), 3561-3572.
Cited: 37 doi: https://doi.org/10.1002/app.20384
83Nakason C., Kaesaman A., Sainamsai W. and Kiatkamjornwong S. (2004). Rheological behavior of reactive blending of epoxidized natural rubber with cassava starch and epoxidized natural rubber with natural rubber and cassava starch. Journal of Applied Polymer Science, 91(3), 1752-1762.
Cited: 13 doi: https://doi.org/10.1002/app.13248
84Nakason C., Kaesaman A. and Supasanthitikul P. (2004). The grafting of maleic anhydride onto natural rubber. Polymer Testing, 23(1), 35-41.
Cited: 164 doi: https://doi.org/10.1016/S0142-9418(03)00059-X
85Nakason C., Kaesaman A. and Yimwan N. (2003). Preparation of graft copolymers from deproteinized and high ammonia concentrated natural rubber latices with methyl methacrylate. Journal of Applied Polymer Science, 87(1 SPEC.), 68-75.
Cited: 43 doi: https://doi.org/10.1002/app.11671
86Nakason C., Kaesaman A., Rungvichaniwat A., Eardrod K. and Kiatkamjornwong S. (2003). Rheological and curing behavior of reactive blending. II. Natural rubber-g-poly(methyl methacrylate)-cassava starch. Journal of Applied Polymer Science, 89(6), 1453-1463.
Cited: 24 doi: https://doi.org/10.1002/app.12191
87Nakason C., Kaesaman A., Samoh Z., Homsin S. and Kiatkamjornwong S. (2002). Rheological properties of maleated natural rubber and natural rubber blends. Polymer Testing, 21(4), 449-455.
Cited: 58 doi: https://doi.org/10.1016/S0142-9418(01)00109-X
88Nakason C., Kaesaman A., Wongkul T. and Kiatkamjornwong S. (2001). Rheological and curing properties of reactive blending products of epoxidised natural rubber and cassava starch. Plastics, Rubber and Composites Processing and Applications, 30(4), 154-161.
Cited: 16 doi: https://doi.org/10.1179/146580101101541570
รวม Scopus 88 รายการ 1,511 citations
ตาราง ผลงานตีพิมพ์ TCI ของ อาซีซัน แกสมาน
ลำดับรายละเอียดผลงาน
1Yuttachai Ruangrat; Pornpot Nuthong; Azizon Kaesaman; Utai Thaicharean (2022). การพัฒนาเครื่องมือทดสอบการกระดอนของบอลในแนวตั้งสำหรับ มอก. 2739-2559 แผ่นยางปูสนามฟุตซอล. วารสารฟิสิกส์ไทย, 39(2), 36-47.
Cited:
2เจริญ นาคะสรรค์; วัชรินทร์ สายนำใส; อาซีซัน แกสมาน; ไพโรจน์ กลิ่นพิทักษ์ (2546). การศึกษาสมบัติการวัลคาไนซ์และสมบัติเชิงฟิสิกส์ของยางธรรมชาติและยางธรรมชาติอิพอกไซด์โดยการใช้สารตัวเร่งชนิดต่างๆ. Songklanakarin Journal of Science and Technology, 25(1), 63-73.
Cited:
3เจริญ นาคะสรรค์; วัชรินทร์ สายน้ำใส; อาซีซัน แกสมาน; ไพโรจน์ กลิ่นพิทักษ์ (2544). การเตรียมสมบัติเชิงความร้อนและสมบัติการไหลของยางธรรมชาติอิพอกไซด์. Songklanakarin Journal of Science and Technology, 23(3), 415-424.
Cited:
4เจริญ นาคะสวรรค์; อาซีซัน แกสมาน; นิกร ยิ้มวัลย์ (2543). การเตรียมกราฟต์โคพอลิเมอร์ของน้ำยางธรรมชาติโปรตีนต่ำและน้ำยางข้นชนิดแอมโมเนียสูงด้วยเมทิลเมทาคริเลท. Songklanakarin Journal of Science and Technology, 22(4), 467-476.
Cited:
รวม TCI 4 รายการ 0 citations

Copyright ©2021-2022 by Faculty of Science and Technology
Prince of Songkla University, 181 Rusamilae Meaung Pattani, 94000
Tel: 073-331303 Email: sat-it@psu.ac.th